Bedienungsanleitung Garmin DEZL 580 (Seite 21 von 34) (Englisch)

699242

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Traffic

NOTICE

Garmin is not responsible for the accuracy or timeliness of the

traffic information.

Your device can provide information about traffic on the road

ahead or on your route. You can set your device to avoid traffic

when calculating routes, and to find a new route to your

destination if a large traffic delay occurs on your active route

(Traffic Settings, page 21). The traffic map allows you to

browse the map for traffic delays in your area.

To provide traffic information, your device must be receiving

traffic data.

• Your device receives free traffic data through the

Smartphone Link app (Receiving Traffic Data Using

Smartphone Link, page 15).

• All product models can receive traffic data using an over-the-

air traffic receiver cable accessory (Receiving Traffic Data

Using a Traffic Receiver, page 15). Go to your product page

at garmin.com to find and purchase a compatible traffic

receiver cable accessory.

Traffic data is not available in all areas. For information about

traffic coverage areas, go to www.garmin.com/traffic.

Receiving Traffic Data Using Smartphone

Link

Your device can receive free traffic data through the

Smartphone Link app.

Connect your device to Smartphone Link (Pairing with Your

Phone and Connecting to Smartphone Link, page 12).

On your dēzl device, select Settings > Traffic, and verify the

Traffic check box is selected.

Receiving Traffic Data Using a Traffic

Receiver

NOTICE

Heated (metallized) windshields could degrade the performance

of the traffic receiver.

A traffic receiver receives traffic data from an over-the-air

broadcast signal, where available. An over-the-air traffic receiver

cable is available as an accessory for all product models. Go to

your product page at garmin.com to find and purchase a

compatible traffic receiver cable accessory. Traffic data is not

available in all areas.

Connect the device to vehicle power using the traffic receiver

cable (Mounting and Powering the dēzl Device in Your

Vehicle, page 1).

When you are within a traffic coverage area, your device can

display traffic information and help you avoid traffic delays.

Traffic Receiver Subscriptions

A regional traffic data subscription is included with most traffic

receivers. You can add subscriptions for additional regions to

your traffic receiver. For more information, go to garmin.com

/traffic.

Viewing Traffic Subscriptions

Select Settings > Traffic > Subscriptions.

Adding a Subscription

You can purchase traffic subscriptions for other regions or

countries.

From the main menu, select Traffic.

Select Subscriptions > .

Write down the FM traffic receiver unit ID.

Go to www.garmin.com/fmtraffic to purchase a subscription

and get a 25-character code.

The traffic subscription code cannot be reused. You must

obtain a new code each time you renew your service. If you

own multiple FM traffic receivers, you must obtain a new

code for each receiver.

Select Next on the device.

Enter the code.

Select Done.

Enabling Traffic

You can enable or disable traffic data.

Select Settings > Traffic.

Select the Traffic check box.

Viewing Traffic on the Map

The traffic map shows color-coded traffic flow and delays on

nearby roads.

From the main menu, select Apps > Traffic.

If necessary, select > Legend to view the legend for the

traffic map.

Searching for Traffic Incidents

From the main menu, select Apps > Traffic.

Select > Incidents.

Select an item in the list.

If there is more than one incident, use the arrows to view

additional incidents.

Vehicle and Driver Tools

Break Planning

NOTICE

This device by itself is NOT an approved substitute for logbook

recording requirements under Federal Motor Carrier Safety

Administration (FMCSA) regulations. Drivers should comply with

all applicable federal and state hours-of-service requirements.

When integrated with a Garmin eLog

™

compliant Electronic

Logging Device (ELD), this device enables a motor carrier to

comply with hours of service logging and break requirements.

For more information, or to purchase a Garmin eLog device, go

to garmin.com/elog.

When the break planning feature is enabled, the device notifies

you one hour before suggested break times and drive hour limits

and suggests break locations on your route. You can use this

feature to keep track of your working hours, which may help you

comply with safety regulations.

NOTE: Break planning features are not available when using the

car vehicle profile.

Taking a Suggested Break

When it is time for a break, the device notifies you and displays

suggested break location POIs along your route.

Select a POI from the list of suggested break locations.

The device adds the break location as the next destination on

your route.

Starting the Break Timer

The break timer starts automatically when the vehicle is moving

at least 8 kph (5 mph) for 30 seconds. You can start the timer

manually at any time.

From the map, select > Break Planner.

Select Start Timer.

Traffic 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin DEZL 580 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin DEZL 580

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info