Bedienungsanleitung Garmin echoMAP 70dv (Seite 23 von 30) (Englisch)

590095

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Restoring Backup Data to a Chartplotter

Insert a memory card into a card reader that is attached to

the computer.

Copy a backup file from the computer to the memory card,

into a folder named Garmin\UserData.

Insert a memory card into the card slot.

Select User Data > Manage Data > Data Transfer >

Replace from Card.

Saving System Information to a Memory

Card

You can save system information to a memory card as a

troubleshooting tool. A product support representative may ask

you to use this information to retrieve data about the network.

Insert a memory card into the card slot.

Select Settings > System > System Information > Garmin

Devices > Save to Card.

If necessary, select the memory card to save system

information to.

Remove the memory card.

Device Configuration

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the

power is applied. Otherwise, you must turn on the chartplotter by

pressing .

Select Settings > System > Auto Power.

NOTE: When Auto Power is On, and the chartplotter is

turned off using , and power is removed and reapplied

within less than two minutes, you may need to press to

restart the chartplotter.

System Settings

Select Settings > System.

Display: Adjusts the backlight brightness and color scheme.

Beeper: Turns on and off the tone that sounds for alarms and

selections.

GPS: Provides information about the GPS satellite settings and

fix.

Auto Power: Turns on the device automatically when power is

applied (Turning On the Chartplotter Automatically ).

Language: Sets the on-screen text language.

Speed Sources: Sets the source of the speed data used to

calculate true wind speed or fuel economy. Water speed is

the speed reading from a water-speed sensor, and GPS

speed is calculated from your GPS position.

System Information: Provides information about the device and

the software version.

Simulator: Turns on the simulator and allows you to set the

speed and simulated location.

Display Settings

Not all options are available on all models.

Select Settings > System > Display.

Backlight: Sets the backlight level.

Color Mode: Sets the device to display day or night colors.

Screenshot Capture: Allows the device to save images of the

screen.

GPS Settings

Select Settings > System > GPS.

Skyview: Shows the relative position of GPS satellites in the

sky.

WAAS/EGNOS: Turns on or off WAAS (in North America) or

EGNOS (in Europe), which can provide more-accurate GPS

position information. When using WAAS or EGNOS, the

device may take longer to acquire satellites.

Speed Filter: Averages the speed of your vessel over a short

period of time for smoother speed values.

Source: Allows you to select the preferred source for GPS.

Viewing the Event Log

The event log shows a list of system events.

Select Settings > System > System Information > Event

Log.

Viewing System Software Information

Select Settings > System > System Information >

Software Information.

My Vessel Settings

NOTE: Some settings and options require additional charts or

hardware.

Select Settings > My Vessel.

Keel Offset: Offsets the surface reading for the depth of a keel,

making it possible to measure depth from the bottom of the

keel instead of from the transducer location (Setting the Keel

Offset).

Temp. Offset: Compensates for the water temperature reading

from a NMEA 0183 water-temperature sensor or a

temperature-capable transducer (Setting the Water

Temperature Offset).

Vessel Type: Enables some chartplotter features based on the

boat type.

Setting the Keel Offset

You can enter a keel offset to compensate the surface reading

for the depth of a keel, making it possible to measure depth from

the bottom of the keel instead of from the transducer location.

Enter a positive number to offset for a keel. You can enter a

negative number to compensate for a large vessel that may

draw several feet of water.

Complete an action, based on the location of the transducer:

• If the transducer is installed at the water line

, measure

the distance from the transducer location to the keel of the

boat. Enter this value in steps 3 and 4 as a positive

number.

• If the transducer is installed at the bottom of the keel

measure the distance from the transducer to the water

line. Enter this value in steps 3 and 4 as a negative

number.

Device Configuration 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin echoMAP 70dv Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info