Bedienungsanleitung Garmin echoMAP CHIRP 72 (Seite 17 von 44) (Englisch)

657704

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

the destination. The path may run over land and other

obstacles.

Route To: Creates a route from your location to a destination,

allowing you to add turns along the way. This option provides

a straight line course to the destination, but allows you to add

turns into the route that avoid land and other obstacles.

Auto Guidance: Creates a path to a destination using Auto

Guidance. This option is available only when using a

compatible premium chart in a compatible chartplotter. It

provides a turn-by-turn navigation line to the destination,

avoiding land and other obstacles. The navigation line is

based on the chart data and the safe depth, safe height, and

shoreline distance user-defined chartplotter settings. Using

these settings and chart data, the chartplotter creates a

navigation line that avoids all areas that cannot be navigated

between the present location and the destination. When you

are using a compatible Garmin autopilot connected to the

chartplotter using NMEA 2000, the autopilot follows the Auto

Guidance route.

Setting and Following a Direct Course Using Go To

CAUTION

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

You can set and follow a direct course from your current location

to a selected destination.

Select a destination (Destinations, page 10).

Select Navigate To > Go To.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your current location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Stopping Navigation

From the Navigation chart or Fishing chart, select MENU >

Stop Navigation.

Waypoints

Waypoints are locations you record and store in the device.

Waypoints can mark where you are, where you are going, or

where you have been. You can add details about the location,

such as name, elevation, and depth.

Marking Your Present Location as a Waypoint

From any screen, select MARK.

Creating a Waypoint at a Different Location

Select User Data > Waypoints > New Waypoint.

Select an option:

• To create the waypoint by entering position coordinates,

select Enter Coordinates, and enter the coordinates.

• To create the waypoint using a chart, select Use Chart,

select the location, and select SELECT.

Marking an MOB or SOS Location

From the Home screen, select Man Overboard > Yes.

An international man overboard (MOB) symbol marks the active

MOB point and the chartplotter sets a direct course back to the

marked location.

Viewing a List of all Waypoints

Select User Data > Waypoints.

Editing a Saved Waypoint

Select User Data > Waypoints.

Select a waypoint.

Select Edit Waypoint.

Select an option:

• To add a name, select Name, and enter a name.

• To change the symbol, select Symbol.

• To change the depth, select Depth.

• To change the water temperature, select Water Temp..

• To change the comment, select Comment.

• To move the position of the waypoint, select Move.

Browsing for and Navigating to a Saved Waypoint

CAUTION

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

NOTE: Auto Guidance is available with premium charts, in some

areas.

Before you can navigate to a waypoint, you must create a

waypoint.

Select User Data > Waypoints.

Select a waypoint.

Select Navigate To.

Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select

Route To.

• To use Auto Guidance, select Auto Guidance.

Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Deleting a Waypoint or an MOB

Select User Data > Waypoints.

Select a waypoint or an MOB.

Select Delete.

Deleting All Waypoints

Select User Data > Manage Data > Clear User Data >

Waypoints > All.

Routes

A route is a sequence of waypoints or locations that leads you to

your final destination.

Creating and Navigating a Route From Your Present

Location

You can create and immediately navigate a route on the

Navigation chart or the Fishing chart. This procedure does not

save the route or the waypoint data.

Navigation with a Chartplotter 11

Garmin echoMAP CHIRP 72 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin echoMAP CHIRP 72

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info