Bedienungsanleitung Garmin echoMAP CHIRP 72 (Seite 19 von 44) (Englisch)

657704

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Select an option:

• Select the time the active track began.

• Select Entire Log.

Viewing a List of Saved Tracks

Select User Data > Tracks > Saved Tracks.

Editing a Saved Track

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Edit Track.

Select an option:

• Select Name, and enter the new name.

• Select Track Color, and select a color.

Saving a Track as a Route

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Edit Track > Save Route.

Browsing for and Navigating a Recorded Track

Before you can browse a list of tracks and navigate to them, you

must record and save at least one track (Tracks, page 12).

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Follow Track.

Select an option:

• To navigate the track from the starting point used when

the track was created, select Forward.

• To navigate the track from the destination point used

when the track was created, select Backward.

Review the course indicated by the colored line.

Follow the line along each leg in the route, steering to avoid

land, shallow water, and other obstacles.

Deleting a Saved Track

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Delete.

Deleting All Saved Tracks

Select User Data > Manage Data > Clear User Data >

Saved Tracks.

Retracing the Active Track

The track currently being recorded is called the active track.

Select User Data > Tracks > Follow Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log.

Review the course indicated by the colored line.

Follow the colored line, steering to avoid land, shallow water,

and other obstacles.

Clearing the Active Track

Select User Data > Tracks > Clear Active Track.

The track memory is cleared, and the active track continues

to be recorded.

Managing the Track Log Memory During Recording

Select User Data > Tracks > Active Track Options.

Select Record Mode.

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap.

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select User Data > Tracks > Active Track Options >

Record Interval > Interval.

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point.

Deleting All Saved Waypoints, Routes, and

Tracks

Select User Data > Manage Data > Clear User Data > All >

OK.

Auto Guidance

CAUTION

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

NOTE: Auto Guidance is available with premium charts, in some

areas.

You can use Auto Guidance to plot the best path to your

destination. Auto Guidance uses your chartplotter to scan chart

data, such as water depth and known obstacles, to calculate a

suggested path. You can adjust the path during navigation.

Setting and Following an Auto Guidance Path

Select a destination (Destinations, page 10).

Select Navigate To > Auto Guidance.

Review the path, indicated by the magenta line.

Select Start Navigation.

Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

Creating an Auto Guidance Path

Select Navigation > Routes & Auto Guidance Paths > New

> Auto Guidance.

Select SELECT, and choose a destination point.

Filtering a List of Routes and Auto Guidance Paths

You can filter a list of routes and Auto Guidance paths to quickly

find a saved destination.

Select MENU > Filter.

Select an option.

Navigation with a Chartplotter 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin echoMAP CHIRP 72 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin echoMAP CHIRP 72

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info