Bedienungsanleitung Garmin Echomap Plus serie (Seite 35 von 54) (Englisch)

691424

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Following the Williamson Turn Pattern

You can use the Williamson turn pattern to steer the boat

around with the intent of running alongside the location where

the Williamson turn pattern was initiated. The Williamson turn

pattern can be used in man overboard situations.

From the autopilot screen, select MENU > Pattern Steering

> Williamson Turn.

Select Engage Port or Engage Starboard.

Reactor

™

Autopilot Remote Control

WARNING

You are responsible for the safe and prudent operation of your

vessel. The autopilot is a tool that enhances your capability to

operate your boat. It does not relieve you of the responsibility of

safely operating your boat. Avoid navigational hazards and

never leave the helm unattended.

You can wirelessly connect a Reactor autopilot remote control to

the chartplotter to control the compatible Reactor autopilot

system.

For more information about using the remote, see the Reactor

autopilot remote control instructions at garmin.com

Pairing a Reactor Autopilot Remote Control With a

Chartplotter

Select Settings > Communications > Wireless Devices >

Autopilot Remote.

If necessary, select Enable.

Select New Connection.

On the remote control, select > Pair with MFD.

The chartplotter beeps and shows a confirmation message.

On the chartplotter, select Yes to complete the pairing

process.

Changing the Functions of the Reactor Autopilot

Remote Control Action Keys

You can change the patterns or actions assigned to the Reactor

autopilot remote control action keys.

Select Settings > Communications > Wireless Devices >

Autopilot Remote > Button Actions.

Select an action key to change.

Select a pattern or action to assign to the action key.

Force

™

Trolling Motor Control

WARNING

Do not run the motor when the propeller is out of the water.

Contact with the rotating propeller may result in severe injury.

Do not use the motor in areas where you or other people in the

water may come into contact with the rotating propeller.

Always disconnect the motor from the battery before cleaning or

servicing the propeller to avoid injury.

You are responsible for the safe and prudent operation of your

vessel. The autopilot is a tool that enhances your capability to

operate your boat. It does not relieve you of the responsibility of

safely operating your boat. Avoid navigational hazards and

never leave the helm unattended.

Learn to operate the autopilot on calm and hazard-free open

water.

Use caution when operating the autopilot near hazards in the

water, such as docks, pilings, and other boats.

CAUTION

When using the autopilot features, be prepared for sudden

stops, acceleration, and turns.

When stowing or deploying the motor, be aware of the risk of

entrapment or pinching from moving parts, which can result in

injury.

When stowing or deploying the motor, be aware of slick surfaces

around the motor. Slipping when stowing or deploying the motor

may result in injury.

You can connect the Force trolling motor to the chartplotter to

view and control the motor using the chartplotter.

Connecting to a Trolling Motor

You can connect the chartplotter wirelessly to a compatible

Garmin Force trolling motor on your boat to control the trolling

motor from the chartplotter

Turn on the chartplotter and the trolling motor.

Enable the Wi‑Fi network on the chartplotter (Setting Up the

‑

Fi Wireless Network, page 38).

Make sure that this chartplotter is the host of the network.

On the chartplotter, select Settings > Communications >

Wireless Devices > Garmin Trolling Motor.

On the trolling motor display panel, press three times to

enter pairing mode.

on the trolling motor display panel is solid blue as it

searches for a connection to the chartplotter, and turns green

when the connection is successful.

After the chartplotter and trolling motor connect successfully,

enable the trolling motor overlay bar to control the motor (Adding

the Trolling Motor Controls to Screens, page 29).

Adding the Trolling Motor Controls to

Screens

After you have connected the chartplotter to the Force trolling

motor, you must add the trolling motor control bar to screens to

control the trolling motor.

Open a screen from which you would like to control the

trolling motor.

Select an option:

• From a combination page or SmartMode

™

layout, select

MENU > Edit > Overlay Numbers.

• From a full screen, select MENU > xxx.

Select Top Bar or Bottom Bar.

Select Trolling Motor Bar.

Repeat these steps to add the trolling motor controls to all of the

screens from which you would like to control the trolling motor.

Trolling Motor Control Bar

The trolling motor control bar allows you to control a Force

trolling motor and see the status of the motor.

Select an item to engage it. The button illuminates when

selected. Select the item again to disengage it.

Trolling motor battery status.

Turns the propeller on and off.

Reduces the speed.

Speed indicator.

Increases the speed.

Enables the cruise control at the current speed over ground

(SOG).

Engages the propellor at full speed.

Trolling motor status.

Force

™

Trolling Motor Control 29

Garmin Echomap Plus serie Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Echomap Plus serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info