Bedienungsanleitung Garmin Echomap Plus serie (Seite 36 von 54) (Englisch)

691424

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Enables anchor lock, which uses the trolling motor to hold your

position.

Steers the trolling motor.

When in anchor lock, jogs the anchor lock position forward,

backward, left, or right.

Enables heading hold (set and maintain the current heading).

When the trolling motor is in heading hold, an autopilot bar

appears in the trolling motor bar.

Opens the trolling motor settings.

Trolling Motor Settings

From the trolling motor bar, select .

Calibrate: Calibrates the trolling motor compass (Calibrating the

Trolling Motor Compass, page 30) and sets the trolling

motor bow offset (Setting the Bow Offset, page 30).

Anchor Gain: Sets the response of the trolling motor when in

anchor lock mode. If you need the trolling motor to be more

responsive and move quicker, increase the value. If the

motor is moving too much, decrease the value.

Navigation Gain: Sets the response of the trolling motor when

navigating. If you need the trolling motor to be more

responsive and move quicker, increase the value. If the

motor is moving too much, decrease the value.

Heading Hold Mode: Sets the heading hold mode. The Vessel

Align option attempts to keep the boat pointing in the same

direction. The Navigate To option attempts to navigate a

straight line in the requested direction.

Auto Power On: Turns on the trolling motor when you apply

power to the system.

Prop. Stow Side: Sets which side of the trolling motor the

propellor rotates to when stowing the trolling motor. This is

helpful when you store other items near the stowed propellor.

Shortcut Keys: Enables the shortcut keys on the trolling motor

remote control to work with this particular chartplotter. The

keys work with only one chartplotter at a time.

Restore Defaults: Resets the trolling motor settings to the

factory default values.

Assigning a Shortcut to the Trolling Motor Remote

Control Shortcut Keys

You can quickly open commonly used screens by assigning a

shortcut key on the trolling motor remote control. You can create

a shortcut to screens, such as sonar screens and charts.

Open a screen.

Hold a shortcut key.

TIP: The shortcut is also saved to the Frequently Used

category with the shortcut key number.

Calibrating the Trolling Motor Compass

You must calibrate the compass in the trolling motor before you

can use the autopilot features.

Drive the boat to an open area of calm water.

From the trolling motor bar, select > Calibrate >

Compass Cal..

Follow the on-screen instructions.

Setting the Bow Offset

Based on the installation angle, the trolling motor may not align

with the center line of your boat. For the best results, you should

set the bow offset.

Adjust the angle of the trolling motor so it aligns with the

center line of your boat , pointing straight forward.

From the trolling motor bar, select > Calibrate > Bow

Offset.

Digital Selective Calling

Chartplotter and NMEA 0183 VHF Radio

Functionality

When your chartplotter is connected to a NMEA 0183 VHF

radio, these features are enabled.

• The chartplotter can transfer your GPS position to your radio.

If your radio is capable, GPS position information is

transmitted with DSC calls.

• The chartplotter can receive digital selective calling (DSC)

distress and position information from the radio.

• The chartplotter can track the positions of vessels sending

position reports.

Turning On DSC

Select Settings > Other Vessels > DSC.

DSC List

The DSC list is a log of the most recent DSC calls and other

DSC contacts you have entered. The DSC list can contain up to

100 entries. The DSC list shows the most recent call from a

boat. If a second call is received from the same boat, it replaces

the first call in the call list.

Viewing the DSC List

Before you can view the DSC list, the chartplotter must be

connected to a VHF radio that supports DSC.

Select Nav Info > Other Vessels > DSC List.

Adding a DSC Contact

You can add a vessel to your DSC list. You can make calls to a

DSC contact from the chartplotter.

Select Nav Info > Other Vessels > DSC List > Add

Contact.

Enter the Maritime Mobile Service Identity (MMSI) of the

vessel.

Enter the name of the vessel.

Incoming Distress Calls

If your compatible chartplotter and VHF radio are connected

using NMEA 0183, your chartplotter alerts you when your VHF

radio receives a DSC distress call. If position information was

sent with the distress call, that information is also available and

recorded with the call.

30 Digital Selective Calling

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Echomap Plus serie Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Echomap Plus serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info