Bedienungsanleitung Garmin ECHOMAP Ultra 100 (Seite 44 von 52) (Englisch)

691421

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

From the wireless device, turn on the Wi‑Fi technology and

search for wireless networks.

Select the name of your chartplotter wireless network (Setting

Up the Wi

‑

Fi Wireless Network, page 37).

Enter the chartplotter password.

Changing the Wireless Channel

You can change the wireless channel if you have trouble finding

or connecting to a device, or if you experience interference.

Select Settings > Communications > Wi-Fi Network >

Advanced > Channel.

Enter a new channel.

You do not need to change the wireless channel of devices

connected to this network.

Setting Alarms

Navigation Alarms

Select Settings > Alarms > Navigation.

Arrival: Sets an alarm to sound when you are within a specified

distance or time from a turn or a destination.

Anchor Drag: Sets an alarm to sound when you exceed a

specified drift distance while anchored.

Off Course: Sets an alarm to sound when you are off course by

a specified distance.

System Alarms

Alarm Clock: Sets an alarm clock.

Device Voltage: Sets an alarm to sound when the battery

reaches a specified low voltage.

GPS Accuracy: Sets an alarm to sound when the GPS location

accuracy falls outside the user-defined value.

Sonar Alarms

NOTE: Not all options are available on all transducers.

From an applicable sonar view, select Menu > Sonar Setup >

Alarms.

You can also open the sonar alarms by selecting Settings >

Alarms > Sonar.

Shallow Water: Sets an alarm to sound when the depth is less

than the specified value.

Deep Water: Sets an alarm to sound when the depth is greater

than the specified value.

FrontVü Alarm: Sets an alarm to sound when the depth in front

of the vessel is less than the specified value, which can help

you avoid running aground (Setting the FrontVü Depth Alarm,

page 24). This alarm is available only with Panoptix FrontVü

transducers.

Water Temp.: Sets an alarm to sound when the transducer

reports a temperature that is 2°F (1.1°C) above or below the

specified temperature.

Fish

Fish: Sets an alarm to sound when the device detects a

suspended target.

• sets the alarm to sound when fish of all sizes are

detected.

• sets the alarm to sound only when medium or large

fish are detected.

• sets the alarm to sound only when large fish are

detected.

Setting the Fuel Alarm

Before you can set a fuel level alarm, a compatible fuel flow

sensor must be connected to the chartplotter.

You can set an alarm to sound when the total amount of

remaining onboard fuel reaches the level you specify.

Select Settings > Alarms > Fuel > Set Total Fuel Onboard

> On.

Enter the remaining amount of fuel that triggers the alarm,

and select Done.

Setting the Safe-Zone Collision Alarm

Before you can set a safe-zone collision alarm, you must have a

compatible chartplotter connected to an AIS device.

The safe-zone collision alarm is used only with AIS. The safe

zone is used for collision avoidance, and can be customized.

Select Settings > Alarms > AIS > AIS Alarm > On.

A message banner appears and an alarm sounds when an

AIS-activated vessel enters the safe-zone area around your

boat. The object is also labeled as dangerous on the screen.

When the alarm is off, the message banner and audible

alarm are disabled, but the object is still labeled as

dangerous on the screen.

Select Range.

Select a distance for the safe-zone radius around your

vessel.

Select Time To.

Select a time at which the alarm will sound if a target is

determined to intersect the safe zone.

For example, to be notified of a pending intersection 10

minutes before it will likely occur, set Time To to 10, and the

alarm will sound 10 minutes before the vessel intersects the

safe zone.

Units Settings

Select Settings > Units.

System Units: Sets the unit format for the device.

Variance: Sets the magnetic declination, the angle between

magnetic north and true north, for your present location.

North Reference: Sets the direction references used in

calculating heading information. True sets geographic north

as the north reference. Grid sets grid north as the north

reference (000º). Magnetic sets the magnetic north as the

north reference.

Position Format: Sets the position format in which a given

location reading appears. Do not change this setting unless

you are using a map or chart that specifies a different

position format.

Map Datum: Sets the coordinate system on which the map is

structured. Do not change this setting unless you are using a

map or chart that specifies a different map datum.

Pressure Reference Time: Sets the reference time used to

calculate the barometer trend. The trend is indicated in the

barometer field.

Time Format: Sets a 12-hour, 24-hour, or UTC time format.

Time Zone: Sets the time zone, or allows automatic selection

based on GPS location.

Navigation Settings

NOTE: Some settings and options require additional charts or

hardware.

Select Settings > Navigation.

Route Labels: Sets the type of labels shown with route turns on

the map.

Auto Guidance: Sets the parameters the chartplotter uses

when calculating an Auto Guidance path, when you are using

some premium maps.

Turn Transition Activ.: Sets the turn transition to be calculated

based on time or distance.

38 Device Configuration

Garmin ECHOMAP Ultra 100 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP Ultra 100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info