Bedienungsanleitung Garmin ECHOMAP Ultra 100 (Seite 46 von 52) (Englisch)

691421

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Select Copy Built-In Map.

Copying Waypoints, Routes, and Tracks

from HomePort to a Chartplotter

Before you can copy data to the chartplotter, you must have the

latest version of the HomePort software program loaded on your

computer and a memory card installed in the chartplotter.

Copy the data from HomePort to the prepared memory card.

For more information, see the HomePort help file.

Backing Up Data to a Computer

Insert a memory card into the card slot.

Select Nav Info > Manage Data > Data Transfer > Save to

Card.

Select a file name from the list, or select Add New File.

Select Save to Card.

Remove the memory card, and insert it into a card reader

attached to a computer.

Open the Garmin\UserData folder on the memory card.

Copy the backup file on the card and paste it to any location

on the computer.

Restoring Backup Data to a Chartplotter

Insert a memory card into a card reader that is attached to

the computer.

Copy a backup file from the computer to the memory card,

into a folder named Garmin\UserData.

Insert a memory card into the card slot.

Select Nav Info > Manage Data > Data Transfer > Replace

from Card.

Saving System Information to a Memory

Card

You can save system information to a memory card as a

troubleshooting tool. A product support representative may ask

you to use this information to retrieve data about the network.

Insert a memory card into the card slot.

Select Settings > System > System Information > Garmin

Devices > Save to Card.

If necessary, select the memory card to save system

information to.

Remove the memory card.

Clearing Saved Data

You can remove saved user data from the device memory. User

data includes waypoints, routes, Auto Guidance paths, tracks,

and boundaries.

Select Nav Info > Manage Data > Clear User Data.

Select an option.

NOTICE

If you select All, all the data you have saved will be removed,

except Garmin Quickdraw contours data.

Appendix

Registering Your Device with Garmin

Express

NOTE: You should use the ActiveCaptain app to register the

device (Getting Started with the ActiveCaptain App, page 2).

Help us better support you by completing our online registration

today. Keep the original sales receipt, or a photocopy, in a safe

place.

Insert a memory card into the card slot (Inserting Memory

Cards, page 1).

Wait a few moments.

The chartplotter opens the card management page and

creates a file named GarminDevice.xml in the Garmin folder

on the memory card.

Remove the memory card.

Insert the memory card into your computer.

On your computer, go to garmin.com/express.

Follow the on-screen instructions to download, install, and

open the Garmin Express application.

Select > Add a Device.

While the application searches, select Sign In next to Have

marine charts or devices? near the bottom of the screen.

Create or sign in to your Garmin account.

Follow the on-screen instructions to set up your vessel.

Select > Add.

The Garmin Express application searches the memory card

for the device information.

Select Add Device to register the device.

When registration is complete, the Garmin Express

application searches for additional charts and chart updates

for your device.

When you add devices to the chartplotter network, repeat these

steps to register the new devices.

Software Update

NOTE: You can use the ActiveCaptain app to update the device

software (Updating Software with the ActiveCaptain App,

page 3).

You may need to update the device software when you install

the device or add an accessory to the device.

This device supports up to a 32 GB memory card, formatted to

FAT32.

Before you update the software, you can check to the software

version installed on your device (Viewing System Software

Information, page 35). Then, you can go to garmin.com/support

/software/marine.html, select See All Devices in this Bundle, and

compare the installed software version to the software version

listed for your product.

If the software on your device is older than the one listed on the

website, follow the steps to load the software on a memory card

(Loading the New Software on a Memory Card, page 40), and

then update the device software (Updating the Device Software,

page 41).

Loading the New Software on a Memory Card

You must copy the software update to a memory card using a

computer that is running Windows

software.

NOTE: You can contact Garmin customer support to order a

preloaded software update card if you do not have a computer

with Windows software.

Insert a memory card into the card slot on the computer.

Go to garmin.com/support/software/marine.html.

Select echoMAP Series with SD Card.

Select Download next to echoMAP Series with SD Card.

Read and agree to the terms.

Select Download.

Choose a location, and select Save.

40 Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin ECHOMAP Ultra 100 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP Ultra 100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info