Bedienungsanleitung Garmin ECHOMAP Ultra serie (Seite 45 von 52) (Englisch)

691420

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Turn Transition Time: Sets how many minutes before the turn

that you transition to it as the next leg, when Time is selected

for the Turn Transition Activ. setting. You can raise this value

to help improve the accuracy of the autopilot when navigating

a route or an Auto Guidance path with many frequent turns or

at higher speeds. For straighter routes or slower speeds,

lowering this value can improve autopilot accuracy.

Turn Transition Dist.: Sets how far before the turn that you

transition to it as the next leg, when Distance is selected for

the Turn Transition Activ. setting. You can raise this value to

help improve the accuracy of the autopilot when navigating a

route or an Auto Guidance path with many frequent turns or

at higher speeds. For straighter routes or slower speeds,

lowering this value can improve autopilot accuracy.

Route Start: Selects a starting point for route navigation.

Other Vessel Settings

When your compatible chartplotter is connected to an AIS

device or VHF radio, you can set up how other vessels are

displayed on the chartplotter.

Select Settings > Other Vessels.

AIS: Enables and disables AIS signal reception.

DSC: Enables and disables digital selective calling (DSC).

AIS Alarm: Sets the collision alarm (Setting the Safe-Zone

Collision Alarm, page 7 and Enabling AIS Transmission Test

Alerts, page 7).

Restoring the Original Chartplotter Factory

Settings

NOTE: This affects all devices on the network.

Select Settings > System > System Information > Reset.

Select an option:

• To reset the device settings to the factory default values,

select Reset Default Settings. This restores the default

configuration settings, but does not remove saved user

data, maps, or software updates.

• To clear saved data, such as waypoints and routes, select

Delete User Data. This does not affect maps or software

updates.

• To clear saved data and reset device settings to the

factory default values, disconnect the chartplotter from the

Garmin Marine Network, and select Delete Data and

Reset Settings. This does not affect maps or software

updates.

Sharing and Managing User Data

You can share data between compatible devices.

• You can share data across the Garmin Marine Network.

• You can share and manage user data using a memory card.

You must have a memory card installed in the device. This

device supports up to a 32 GB memory card, formatted to

FAT32.

Connecting to a Garmin Device to Share

User Data

You can connect the ECHOMAP Ultra device to a compatible

Garmin device to share user data, such as waypoints. If the

devices are mounted near each other, you can connect the blue

and brown wires. If the devices are mounted too far apart for the

wires to reach, you can connect the devices using a User Data

Sharing Cable (010-12234-06).

Make sure both devices are connected to the same ground.

Complete an action:

• If the devices are mounted near each other, connect the

blue wire from the first device to the brown wire of the

second, and connect the brown wire from the first device

to the blue wire of the second.

• If the devices are not mounted near each other, obtain a

User Data Sharing Cable (010-12234-06), and connect

the devices following the instructions included with the

cable.

On both devices, select Nav Info > Manage Data > User

Data Sharing.

User data is shared between the connected devices. If you

select Clear User Data, data is removed from both connected

devices.

Selecting a File Type for Third-Party

Waypoints and Routes

You can import and export waypoints and routes from third-party

devices.

Insert a memory card into the card slot.

Select Nav Info > Manage Data > Data Transfer > File

Type.

Select GPX.

To transfer data with Garmin devices again, select the ADM file

type.

Copying User Data from a Memory Card

You can transfer user data from a memory card to transfer from

other devices. User data includes waypoints, routes, Auto

Guidance paths, tracks, and boundaries.

NOTE: Only boundary files with an .adm extension are

supported.

Insert a memory card into a card slot.

Select Nav Info > Manage Data > Data Transfer.

If necessary, select the memory card to copy data to.

Select an option:

• To transfer data from the memory card to the chartplotter

and combine it with existing user data, select Merge from

Card.

• To transfer data from the memory card to the chartplotter

and overwrite existing user data, select Replace from

Card.

Select the file name.

Copying User Data to a Memory Card

You can save user data to a memory card to transfer to other

devices. User data includes waypoints, routes, Auto Guidance

paths, tracks, and boundaries.

Insert a memory card into the card slot.

Select Nav Info > Manage Data > Data Transfer > Save to

Card.

If necessary, select the memory card to copy the data to.

Select an option:

• To create a new file, select Add New File, and enter a

name.

• To add the information to an existing file, select the file

from the list, and select Save to Card.

Copying Built-In Maps to a Memory Card

You can copy maps from the chartplotter to a memory card for

use with HomePort.

Insert a memory card into the card slot.

Select Nav Info > Manage Data > Data Transfer.

Sharing and Managing User Data 39

Garmin ECHOMAP Ultra serie Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin ECHOMAP Ultra serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info