Bedienungsanleitung Garmin Edge 820 (Seite 21 von 30) (Englisch)

657429

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Select Heart Rate Alert, Cadence Alert, or Power Alert.

If necessary, turn on the alert.

Select the minimum and maximum values, or select zones.

If necessary, select .

Each time you exceed or drop below the specified range, a

message appears. The device also beeps if audible tones are

turned on (Turning the Device Tones On and Off, page 18).

Setting a Recurring Alert

A recurring alert notifies you each time the device records a

specified value or interval. For example, you can set the device

to alert you every 30 minutes.

Select > Settings > Activity Profiles.

Select a profile.

Select Alerts.

Select Time Alert, Distance Alert, or Calorie Alert.

Turn on the alert.

Enter a value.

Select .

Each time you reach the alert value, a message appears. The

device also beeps if audible tones are turned on (Turning the

Device Tones On and Off, page 18).

Auto Lap

Marking Laps by Position

You can use the Auto Lap feature to mark the lap at a specific

position automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, a long

climb or training sprints). During courses, you can use the By

Position option to trigger laps at all of the lap positions saved in

the course.

Select > Settings > Activity Profiles.

Select a profile.

Select Auto Lap > Auto Lap Trigger > By Position > Lap

At.

Select an option:

• Select Lap Press Only to trigger the lap counter each

time you select and each time you pass any of those

locations again.

• Select Start and Lap to trigger the lap counter at the GPS

location where you select and at any location during

the ride where you select .

• Select Mark and Lap to trigger the lap counter at a

specific GPS location marked before the ride and at any

location during the ride where you select .

If necessary, customize the lap data fields (Customizing the

Data Screens, page 16).

Marking Laps by Distance

You can use the Auto Lap feature to mark the lap at a specific

distance automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, every 10

miles or 40 kilometers).

Select > Settings > Activity Profiles.

Select a profile.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Distance > Lap At.

Enter a value.

If necessary, customize the lap data fields (Customizing the

Data Screens, page 16).

Using Auto Pause

You can use the Auto Pause feature to pause the timer

automatically when you stop moving or when your speed drops

below a specified value. This feature is helpful if your ride

includes stop lights or other places where you need to slow

down or stop.

NOTE: History is not recorded while the timer is stopped or

paused.

Select > Settings > Activity Profiles.

Select a profile.

Select Auto Features > Auto Pause.

Select an option:

• Select When Stopped to pause the timer automatically

when you stop moving.

• Select Custom Speed to pause the timer automatically

when your speed drops below a specified value.

If necessary, customize optional time data fields

(Customizing the Data Screens, page 16).

Using Auto Sleep

You can use the Auto Sleep feature to automatically enter sleep

mode after 5 minutes of inactivity. During sleep mode, the

screen is turned off and the ANT+ sensors, Bluetooth, and GPS

are disconnected.

Wi‑Fi continues to run while the device is asleep.

Select > Settings > Activity Profiles.

Select a profile.

Select Auto Features > Auto Sleep.

Using Auto Scroll

You can use the Auto Scroll feature to automatically cycle

through all of the training data screens while the timer is

running.

Select > Settings > Activity Profiles.

Select a profile.

Select Auto Features > Auto Scroll.

Select a display speed.

Starting the Timer Automatically

This feature automatically detects when your device has

acquired satellites and is moving. It starts the timer or reminds

you to start the timer so you can record your ride data.

Select > Settings > Activity Profiles.

Select a profile.

Select Timer Start Mode.

Select an option:

• Select Manual, and select to start the timer.

• Select Prompted to display a visual reminder when you

reach the start notice speed.

• Select Auto to start the timer automatically when you

reach the start notice speed.

Bluetooth Settings

Select > Settings > Bluetooth.

Enable: Enables Bluetooth wireless technology.

NOTE: Other Bluetooth settings appear only when Bluetooth

wireless technology is enabled.

Friendly Name: Allows you to enter a friendly name that

identifies your devices with Bluetooth wireless technology.

Pair Smartphone: Connects your device with a compatible

Bluetooth enabled smartphone. This setting allows you to use

Bluetooth connected features, including LiveTrack and

activity uploads to Garmin Connect.

Call and Text Alerts: Allows you to enable phone notifications

from your compatible smartphone.

Missed Calls and Texts: Displays missed phone notifications

from your compatible smartphone.

Customizing Your Device 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Edge 820 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info