Bedienungsanleitung Garmin Edge 820 (Seite 23 von 30) (Englisch)

657429

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Caring for the Heart Rate Monitor

NOTICE

You must unsnap and remove the module before washing the

strap.

A build up of sweat and salt on the strap can decrease the ability

of the heart rate monitor to report accurate data.

• Go to www.garmin.com/HRMcare for detailed washing

instructions.

• Rinse the strap after every use.

• Machine wash the strap after every seven uses.

• Do not put the strap in a dryer.

• When drying the strap, hang it up or lay it flat.

• To prolong the life of your heart rate monitor, unsnap the

module when not in use.

User Replaceable Batteries

WARNING

Do not use a sharp object to remove batteries.

Keep the battery away from children.

Never put batteries in mouth. If swallowed, contact your

physician or local poison control center.

Replaceable coin cell batteries may contain perchlorate

material. Special handling may apply. See www.dtsc.ca.gov

/hazardouswaste/perchlorate.

CAUTION

Contact your local waste disposal department to properly

recycle the batteries.

Replacing the Heart Rate Monitor Battery

Use a small Phillips screwdriver to remove the four screws on

the back of the module.

Remove the cover and battery.

Wait 30 seconds.

Insert the new battery with the positive side facing up.

NOTE: Do not damage or lose the O-ring gasket.

Replace the back cover and the four screws.

NOTE: Do not overtighten.

After you replace the heart rate monitor battery, you may need

to pair it with the device again.

Replacing the Speed Sensor or Cadence Sensor

Battery

The LED flashes red to indicate a low battery level after two

revolutions.

Locate the circular battery cover

on the back of the sensor.

Twist the cover counter-clockwise until the marker points to

unlocked and the cover is loose enough to remove.

Remove the cover and the battery

TIP: You can use a piece of tape

or a magnet to remove

the battery from the cover.

Wait 30 seconds.

Insert the new battery into the cover, observing polarity.

NOTE: Do not damage or lose the O-ring gasket.

Twist the cover clockwise until the marker points to locked.

NOTE: The LED flashes red and green for a few seconds

after battery replacement. When the LED flashes green and

then stops flashing, the device is active and ready to send

data.

Troubleshooting

Resetting the Device

If the device stops responding, you may need to reset it. This

does not erase any of your data or settings.

Hold for 10 seconds.

The device resets and turns on.

Clearing User Data

You can restore all of the device settings to the factory default

values.

NOTE: This deletes all user-entered information, but it does not

delete your history.

Select > Settings > System > Device Reset > Factory

Reset > .

Maximizing Battery Life

• Turn on Battery Save Mode (Turning On Battery Save

Mode, page 19).

• Decrease the backlight brightness (Using the Backlight,

page 2) or shorten the backlight timeout (Display Settings,

page 18).

• Select the Smart recording interval (Data Recording Settings,

page 18).

• Turn on the Auto Sleep feature (Using Auto Sleep, page 17).

• Turn off the Bluetooth wireless feature (Bluetooth Settings,

page 17).

• Select the GPS setting (Changing the Satellite Setting,

page 16).

Turning On Battery Save Mode

Battery save mode adjusts the settings automatically to extend

the battery life for longer rides. During an activity, the screen

turns off. You can enable automatic alerts and tap the screen to

wake it up. Battery save mode records GPS track points and

sensor data less frequently. Speed, distance, and track data

accuracy are reduced.

NOTE: History is recorded in battery save mode when the timer

is running.

Select > Settings > Battery Save Mode > Enable.

Select the alerts that wake up the screen during an activity.

Troubleshooting 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Edge 820 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info