Bedienungsanleitung Garmin Edge Explore (Seite 13 von 20) (Englisch)

691280

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Select an option.

• Select another category to select more data fields.

• Select .

Select or to change the layout.

Select .

Select an option.

• Tap twice on a data field to change it.

• Tap a data field, and then tap another data field to

rearrange them.

Select .

Editing a Data Screen

Select > Ride Settings.

Select Data Screens.

Select a data screen.

Select Layout and Data Fields.

Select a category, select data fields to add or remove, and

select > .

Select or to change the layout.

Select .

Select an option.

• Tap twice on a data field to change it.

• Tap a data field, and tap another data field to rearrange

them.

Select .

Rearranging Data Screens

Select > Ride Settings.

Select Data Screens > .

Select a data screen.

Select or .

Select .

Alerts

You can use alerts to train toward specific time, distance,

calorie, heart rate, and cadence goals.

Setting Range Alerts

If you have an optional heart rate monitor or cadence sensor,

you can set up range alerts. A range alert notifies you when the

device measurement is above or below a specified range of

values. For example, you can set the device to alert you when

your heart rate is below 90 BPM and over 160 BPM (Setting

Your Heart Rate Zones, page 6).

Select > Ride Settings > Alerts.

Select Heart Rate Alert or Cadence Alert.

If necessary, turn on the alert.

Select the minimum and maximum values, or select zones.

If necessary, select .

Each time you exceed or drop below the specified range, a

message appears. The device also beeps if audible tones are

turned on (Turning the Device Tones On and Off, page 11).

Setting a Recurring Alert

A recurring alert notifies you each time the device records a

specified value or interval. For example, you can set the device

to alert you every 30 minutes.

Select > Ride Settings.

Select Alerts.

Select an alert type.

Turn on the alert.

Enter a value.

Select .

Each time you reach the alert value, a message appears. The

device also beeps if audible tones are turned on (Turning the

Device Tones On and Off, page 11).

Auto Lap

Marking Laps by Position

You can use the Auto Lap feature to mark the lap at a specific

position automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, a long

climb or training sprints). During courses, you can use the By

Position option to trigger laps at all of the lap positions saved in

the course.

Select > Ride Settings.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Position > Lap At.

Select an option:

• Select Lap Press Only to trigger the lap counter each

time you select and each time you pass any of those

locations again.

• Select Start and Lap to trigger the lap counter at the GPS

location where you select and at any location during

the ride where you select .

• Select Mark and Lap to trigger the lap counter at a

specific GPS location marked before the ride and at any

location during the ride where you select .

If necessary, customize the lap data fields (Editing a Data

Screen, page 9).

Marking Laps by Distance

You can use the Auto Lap feature to mark the lap at a specific

distance automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, every 10

miles or 40 kilometers).

Select > Ride Settings.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Distance > Lap At.

Enter a value.

If necessary, customize the lap data fields (Editing a Data

Screen, page 9).

Marking Laps by Time

You can use the Auto Lap feature to mark the lap at a specific

time automatically. This feature is helpful for comparing your

performance over different parts of a ride (for example, every 20

minutes).

Select > Ride Settings.

Select Auto Features > Auto Lap > Auto Lap Trigger > By

Time > Lap At.

Enter a value.

If necessary, customize the lap data fields (Editing a Data

Screen, page 9).

Using Auto Sleep

You can use the Auto Sleep feature to automatically enter sleep

mode after 5 minutes of inactivity. During sleep mode, the

screen is turned off and the ANT+ sensors, Bluetooth, and GPS

are disconnected.

Select > Ride Settings.

Select Auto Features > Auto Sleep.

Using Auto Pause

You can use the Auto Pause

feature to pause the timer

automatically when you stop moving or when your speed drops

below a specified value. This feature is helpful if your ride

includes stop lights or other places where you need to slow

down or stop.

Customizing Your Device 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Edge Explore Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Edge Explore

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info