Bedienungsanleitung Garmin Fenix 3 Sapphire HR (Seite 24 von 34) (Englisch)

628979

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Select an option:

• To calibrate automatically from your GPS starting point,

select Auto Cal.

> On

• To enter a known altitude, select Calibrate

Barometer Settings

Hold UP

, and select

Settings > Sensors > Barometer.

Plot: Sets the time scale for the chart in the barometer widget.

Storm Alert: Sets the rate of barometric pressure change that

triggers a storm alert.

Navigation Settings

You can customize the map features and appearance when

navigating to a destination.

Customizing Map Features

Hold UP

Select Settings

> Navigation > Data Screens

Select an option:

• Select

Map to turn on or off the map.

• Select

Guide to turn on or off the guide screen that

displays the compass bearing or course to follow while

navigating.

• Select a screen to add, remove, or customize.

Setting Up a Heading Bug

You can set up a heading indicator to display on your data

pages while navigating. The indicator points to your target

heading.

Hold

UP.

Select Settings

> Navigation > Heading Bug

System Settings

Hold UP

, and select

Settings > System.

User Profile: Allows you to open and customize your personal

statistics

(

Setting Up Your User Profile, page 9).

Hot Keys: Allows you to assign shortcuts to device keys.

Language: Sets the language displayed on the device.

Time: Adjusts the time settings (Time Settings

, page

20).

Backlight: Adjusts the backlight settings (Backlight Settings,

page 20)

Sounds: Sets the device sounds, such as key tones, alerts, and

vibrations.

Units: Sets the units of measure used on the device (Changing

the Units of Measure,

page

20).

GLONASS: Using

GLONASS provides increased performance

in challenging environments and faster position acquisition.

Using the GPS and GLONASS options can reduce battery

life more than using the GPS option only.

Pos. Format: Sets the geographical position format and datum

options.

Format: Sets general format preferences, such as the pace and

speed shown during activities, and the start of the week.

Data Recording: Sets how the device records activity data. The

Smart

recording option (default) allows for longer activity

recordings. The Every Second recording option provides

more detailed activity recordings, but may not record entire

activities that last for longer periods of time.

USB Mode: Sets the device to use mass storage mode or

Garmin mode when connected to a computer.

Restore Defaults: Allows you to reset user data and settings

(Restoring All Default Settings,

page

22).

Software Update: Allows you to install software updates

downloaded using Garmin Express.

About: Displays device, software, and license information.

Time Settings

Hold

UP, and select

Settings > System > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Set Time: Sets the time zone for the device. The Auto

option

sets the time zone automatically based on your GPS position.

Time: Allows you to adjust the time if it is set to the Manual

option.

Backlight Settings

Hold

UP, and select

Settings > System > Backlight.

Mode: Sets the backlight to turn on manually or automatically.

The

Auto option allows you to separately set the backlight for

keys, alerts, and gestures.

NOTE:

When you set Gesture to On, you trigger the backlight

by raising and turning your arm to look at your wrist.

Timeout: Sets the length of time before the backlight turns off.

Brightness: Sets the brightness level of the backlight.

Changing the Units of Measure

You can customize units of measure for distance, pace and

speed, elevation, weight, height, and temperature.

Hold

UP.

Select Settings > System >

Units

Select a measurement type.

Select a unit of measure.

ANT+

Sensors

The device is compatible with these optional, wireless ANT+

accessories.

• Heart rate monitor, such as

HRM-Run

(Putting On the Heart

Rate Monitor, page 2)

• Bike speed and cadence sensor (Using an Optional Bike

Speed or Cadence Sensor, page 21)

• Foot pod (Foot Pod

, page

21)

• Power sensor, such as Vector

™

• tempe

™

wireless temperature sensor (tempe,

page

21)

For information about compatibility and purchasing additional

sensors, go to http://buy.garmin.com.

Pairing

ANT+ Sensors

The first time you connect a sensor to your device using ANT+

wireless technology, you must pair the device and sensor. After

they are paired, the device connects to the sensor automatically

when you start an activity and the sensor is active and within

range.

NOTE: If a heart rate monitor was bundled with your device, the

included heart rate monitor is already paired with your device.

If you are pairing a heart rate monitor, put on the heart rate

monitor (Putting On the Heart Rate Monitor, page 2).

The heart rate monitor does not send or receive data until

you put it on.

Bring the device within 3 m (10 ft.) of the sensor.

NOTE:

Stay 10 m (33 ft.) away from other ANT+ sensors

while pairing.

Hold UP.

Select Settings

> Sensors > Add New

Select an option:

• Select

Search All.

• Select your sensor type.

20 ANT+ Sensors

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fenix 3 Sapphire HR Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fenix 3 Sapphire HR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info