Bedienungsanleitung Garmin Fenix 3 Sapphire HR (Seite 25 von 34) (Englisch)

628979

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

After the sensor is paired with your device, the sensor status

changes from Searching to Connected. Sensor data appears

in the data page loop or a custom data field.

Using an Optional Bike Speed or Cadence

Sensor

You can use a compatible bike speed or cadence sensor to

send data to your device.

• Pair the sensor with your device (Pairing

ANT+ Sensors,

page

20)

• Update your fitness user profile information (Setting Up Your

User Profile

, page

• Set your wheel size (Wheel Size and Circumference,

page 26)

• Go for a ride

(

Going for a Ride

, page

Foot Pod

Your device is compatible with the foot pod. You can use the

foot pod to record pace and distance instead of using GPS when

you are training indoors or when your GPS signal is weak. The

foot pod is on standby and ready to send data (like the heart

rate monitor).

After 30 minutes of inactivity, the foot pod powers off to

conserve the battery. When the battery is low, a message

appears on your device. Approximately five hours of battery life

remain.

Improving Foot Pod Calibration

Before you can calibrate your device, you must acquire GPS

signals and pair your device with the foot pod (Pairing ANT+

Sensors, page 20).

The foot pod is self-calibrating, but you can improve the

accuracy of the speed and distance data with a few outdoor runs

using GPS.

Stand outside for 5 minutes with a clear view of the sky.

Start a running activity.

Run on a track without stopping for 10 minutes.

Stop your activity, and save it.

Based on the recorded data, the foot pod calibration value

changes, if necessary. You should not need to calibrate the

foot pod again unless your running style changes.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device

with the foot pod sensor (Pairing ANT+

Sensors, page

20).

Manual calibration is recommended if you know your calibration

factor. If you have calibrated a foot pod with another Garmin

product, you may know your calibration factor.

Hold

UP.

Select Settings > Sensors.

Select your foot pod.

Select Cal. Factor

> Set Value

Adjust the calibration factor:

• Increase the calibration factor if your distance is too low.

• Decrease the calibration factor if your distance is too high.

Setting Foot Pod Speed and Distance

Before you can customize the foot pod speed and distance, you

must pair your device with the foot pod sensor (Pairing

ANT+

Sensors, page

20)

You can set your device to calculate pace and distance from

your foot pod data instead of GPS data.

Hold

UP.

Select Settings > Sensors.

Select your foot pod.

Select

Speed.

Select an option:

• Select

Indoor when you are training with GPS turned off,

usually indoors.

• Select

Always to use your foot pod data regardless of the

GPS setting.

tempe

The

tempe is an ANT+ wireless temperature sensor. You can

attach the sensor to a secure strap or loop where it is exposed

to ambient air, and therefore, provides a consistent source of

accurate temperature data. You must pair the tempe with your

device to display temperature data from the tempe.

Device Information

Viewing Device Information

You can view the unit ID, software version, regulatory

information, and license agreement.

Hold UP.

Select Settings

> System > About

Specifications

Battery type Rechargeable, built-in lithium-ion battery

Battery life Up to 6 wk.

Water rating 10 ATM*

Operating temperature

range

From -20º to 55ºC (from -4º to 131ºF)

Charging temperature

range

From 0º to 45ºC (from 32º to 113ºF)

Radio frequency 2.4 GHz

Radio protocols

ANT+

wireless technology, Wi‑Fi, Bluetooth

Smart device

*The device withstands pressure equivalent to a depth of 100 m.

For more information, go to www.garmin.com/waterrating.

Battery Information

The actual battery life depends on the features enabled on your

device, such as activity tracking, smartphone notifications, GPS,

internal sensors, and connected ANT+

sensors.

Battery Life Mode

Up to 20 hr. Normal GPS mode

Up to 50 hr. UltraTrac

GPS mode with two-minute polling interval

Up to 6 wk. Watch mode

HRM-Run

Specifications

Battery type User-replaceable CR2032, 3 V

Battery life 1 yr. (approximately 1 hr./day)

Operating temperature

range

From -10° to 50°C (from 14° to 122°F)

Radio frequency/protocol 2.4 GHz

ANT+ wireless communications

protocol

Water rating 5 ATM*

*The device withstands pressure equivalent to a depth of 50 m.

For more information, go to www.garmin.com/waterrating.

Data Management

NOTE:

The device is not compatible with Windows

95, 98, Me,

Windows NT

, and

Mac

OS 10.3 and earlier.

Device Information 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fenix 3 Sapphire HR Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fenix 3 Sapphire HR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info