Bedienungsanleitung Garmin Fenix 3 (Seite 13 von 28) (Englisch)

589541

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Females Percentile 20–29 30–39 40–49 50–59 60–69 70–79

Superior 95 49.6 47.4 45.3 41.1 37.8 36.7

Excellent 80 43.9 42.4 39.7 36.7 33 30.9

Good 60 39.5 37.8 36.3 33 30 28.1

Fair 40 36.1 34.4 33 30.1 27.5 25.9

Poor 0–40 <36.1 <34.4 <33 <30.1 <27.5 <25.9

Data reprinted with permission from The Cooper Institute. For more information, go to www.CooperInstitute.org.

Viewing Your Predicted Race Times

Before you can view your projected race times (running only),

you must put on a heart rate monitor and pair it with your device.

For the most accurate estimate, complete the user profile setup

(Setting Up Your User Profile), and set your maximum heart rate

(Setting Your Heart Rate Zones).

Your device uses the VO2 max. estimate (About VO2 Max.

Estimates) and published data sources to provide a target race

time based on your current state of fitness. This projection also

presumes you have completed the proper training for the race.

NOTE: The projections may seem inaccurate at first. The device

requires a few runs to learn about your running performance.

1Put on your heart rate monitor, and go for a run.

2Hold UP.

3Select My Stats > Race Predictor.

Your projected race times appear for 5K, 10K, half marathon,

and marathon distances.

Recovery Advisor

You can use your Garmin device paired with the heart rate

monitor to display how much time remains before you are fully

recovered and ready for the next hard workout. The recovery

advisor feature includes recovery time and recovery check.

Recovery advisor technology is provided and supported by

Firstbeat Technologies Ltd.

Recovery check: The recovery check provides a real-time

indication of your state of recovery within the first several

minutes of an activity.

Recovery time: The recovery time appears immediately

following an activity. The time counts down until it is optimal

for you to attempt another hard workout.

Turning On the Recovery Advisor

Before you can use the recovery advisor feature, you must put

on the heart rate monitor and pair it with your device (Pairing

ANT+ Sensors). If your fēnix 3 was packaged with a heart rate

monitor, the devices are already paired. For the most accurate

estimate, you must complete the user profile setup (Setting Up

Your User Profile), and set your maximum heart rate (Setting

Your Heart Rate Zones).

1Hold UP.

2Select My Stats > Recovery Advisor > Status > On.

3Go for a run.

Within the first several minutes of your run, a recovery check

appears, showing your real-time state of recovery.

4After your run, select Save.

The recovery time appears. The maximum time is 4 days,

and the minimum time is 6 hours.

Viewing Your Recovery Time

Before you can view your recovery time, you must enable the

recovery advisor.

1Hold UP.

2Select My Stats > Recovery Advisor.

The recovery time appears. The maximum time is 4 days,

and the minimum time is 6 hours.

About Training Effect

Training Effect measures the impact of an activity on your

aerobic fitness. Training Effect accumulates during the activity.

As the activity progresses, the training effect value increases,

telling you how the activity has improved your fitness. Training

Effect is determined by your user profile information, heart rate,

duration, and intensity of your activity.

It is important to know that your Training Effect numbers (1.0–

5.0) may seem abnormally high during your first few runs. It

takes several activities for the device to learn your aerobic

fitness.

Training Effect Description

1.0–1.9 Helps recovery (short activities). Improves endurance

with longer activities (more than 40 minutes).

2.0–2.9 Maintains your aerobic fitness.

3.0–3.9 Improves your aerobic fitness if repeated as part of

your weekly training program.

4.0–4.9 Highly improves your aerobic fitness if repeated 1–2

times per week with adequate recovery time.

5.0 Causes temporary overload with high improvement.

Train up to this number with extreme care. Requires

additional recovery days.

Training Effect technology is provided and supported by

Firstbeat Technologies Ltd. For more information, go to

www.firstbeattechnologies.com.

Clock

Setting the Alarm

1Hold UP.

2Select Clock > Alarm Clock > Status > On.

3Select Time, and enter the alarm time.

4If necessary, select Notification, and select a type of

notification.

Starting the Countdown Timer

1Hold UP.

2Select Clock > Timer.

3Enter the time.

4If necessary, select Restart > On to automatically restart the

timer after it expires.

5If necessary, select Notification, and select a type of

notification.

6Select Start Timer.

Using the Stopwatch

1Hold UP.

2Select Clock > Stopwatch.

3From the clock, select START.

Setting Sunrise and Sunset Alerts

You can set the sunrise and sunset alerts to sound a specific

number of minutes or hours before the actual sunrise or sunset

occurs.

Clock 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fenix 3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fenix 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info