Bedienungsanleitung Garmin Fenix 5 plus (Seite 21 von 50) (Englisch)

674099

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Orange Fair

Red Poor

VO2 max. data is provided by FirstBeat. VO2 max. analysis is

provided with permission from The Cooper Institute

. For more

information, see the appendix (VO2 Max. Standard Ratings,

page 39), and go to www.CooperInstitute.org.

Getting Your VO2 Max. Estimate for Running

This feature requires wrist-based heart rate or a compatible

chest heart rate monitor. If you are using a chest heart rate

monitor, you must put it on and pair it with your device (Pairing

Your Wireless Sensors, page 32). If your fēnix 5/5S/5X Plus

device was packaged with a heart rate monitor, the devices are

already paired.

For the most accurate estimate, complete the user profile setup

(Setting Up Your User Profile, page 18), and set your

maximum heart rate (Setting Your Heart Rate Zones, page 18).

The estimate may seem inaccurate at first. The device requires

a few runs to learn about your running performance.

Run for at least 10 minutes outdoors.

After your run, select Save.

Select UP or DOWN to view the performance widget.

Select to scroll through the performance measurements.

Getting Your VO2 Max. Estimate for Cycling

This feature requires a power meter and wrist-based heart rate

or a compatible chest heart rate monitor. The power meter must

be paired with your fēnix 5/5S/5X Plus device (Pairing Your

Wireless Sensors, page 32). If you are using a chest heart rate

monitor, you must put it on and pair it with your device. If your

fēnix 5/5S/5X Plus device was packaged with a heart rate

monitor, the devices are already paired.

For the most accurate estimate, complete the user profile setup

(Setting Up Your User Profile, page 18) and set your maximum

heart rate (Setting Your Heart Rate Zones, page 18). The

estimate may seem inaccurate at first. The device requires a few

rides to learn about your cycling performance.

Ride at a steady, high intensity for at least 20 minutes.

After your ride, select Save.

Select UP or DOWN to view the performance widget.

Select to scroll through the performance measurements.

Recovery Time

You can use your Garmin device with wrist-based heart rate or a

compatible chest heart rate monitor to display how much time

remains before you are fully recovered and ready for the next

hard workout.

NOTE: The recovery time recommendation uses your VO2 max.

estimate and may seem inaccurate at first. The device requires

you to complete a few activities to learn about your

performance.

The recovery time appears immediately following an activity.

The time counts down until it is optimal for you to attempt

another hard workout.

Viewing Your Recovery Time

For the most accurate estimate, complete the user profile setup

(Setting Up Your User Profile, page 18), and set your

maximum heart rate (Setting Your Heart Rate Zones, page 18).

Go for a run.

After your run, select Save.

The recovery time appears. The maximum time is 4 days.

NOTE: From the watch face, you can select UP or DOWN to

view the performance widget, and select to scroll through

the performance measurements to view your recovery time.

Recovery Heart Rate

If you are training with wrist-based heart rate or a compatible

chest heart rate monitor, you can check your recovery heart rate

value after each activity. Recovery heart rate is the difference

between your exercising heart rate and your heart rate two

minutes after the exercise has stopped. For example, after a

typical training run, you stop the timer. Your heart rate is

140 bpm. After two minutes of no activity or cool down, your

heart rate is 90 bpm. Your recovery heart rate is 50 bpm (140

minus 90). Some studies have linked recovery heart rate to

cardiac health. Higher numbers generally indicate healthier

hearts.

TIP: For best results, you should stop moving for two minutes

while the device calculates your recovery heart rate value. You

can save or discard the activity after this value appears.

Training Load

Training load is a measurement of your training volume over the

last seven days. It is the sum of your excess post-exercise

oxygen consumption (EPOC) measurements for the last seven

days. The gauge indicates whether your current load is low,

high, or within the optimal range to maintain or improve your

fitness level. The optimal range is determined based on your

individual fitness level and training history. The range adjusts as

your training time and intensity increase or decrease.

Viewing Your Predicted Race Times

For the most accurate estimate, complete the user profile setup

(Setting Up Your User Profile, page 18), and set your

maximum heart rate (Setting Your Heart Rate Zones, page 18).

Your device uses the VO2 max. estimate (About VO2 Max.

Estimates, page 14) and published data sources to provide a

target race time based on your current state of fitness. This

projection also presumes you have completed the proper

training for the race.

NOTE: The projections may seem inaccurate at first. The device

requires a few runs to learn about your running performance.

Select UP or DOWN to view the performance widget.

Select to scroll through the performance measurements.

Your projected race times appear for 5K, 10K, half marathon,

and marathon distances.

About Training Effect

Training Effect measures the impact of an activity on your

aerobic and anaerobic fitness. Training Effect accumulates

during the activity. As the activity progresses, the Training Effect

value increases, telling you how the activity has improved your

fitness. Training Effect is determined by your user profile

information, heart rate, duration, and intensity of your activity.

Aerobic Training Effect uses your heart rate to measure how the

accumulated intensity of an exercise affects your aerobic fitness

and indicates if the workout had a maintaining or improving

effect on your fitness level. Your EPOC accumulated during

exercise is mapped to a range of values that account for your

fitness level and training habits. Steady workouts at moderate

effort or workouts involving longer intervals (>180 sec) have a

positive impact on your aerobic metabolism and result in an

improved aerobic Training Effect.

Anaerobic Training Effect uses heart rate and speed (or power)

to determine how a workout affects your ability to perform at

very high intensity. You receive a value based on the anaerobic

contribution to EPOC and the type of activity. Repeated high-

intensity intervals of 10 to 120 seconds have a highly beneficial

impact on your anaerobic capability and result in an improved

anaerobic Training Effect.

It is important to know that your Training Effect numbers (from

0.0 to 5.0) may seem abnormally high during your first few

activities. It takes several activities for the device to learn your

aerobic and anaerobic fitness.

Heart Rate Features 15

Garmin Fenix 5 plus Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fenix 5 plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info