Bedienungsanleitung Garmin Fenix (Seite 16 von 22) (Englisch)

501903

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Foot Pod Calibration

Calibrating your foot pod is optional and can improve accuracy.

There are three ways to adjust the calibration: distance, GPS,

and manual.

Calibrating Your Foot Pod by Distance

Before you can calibrate your device, you must pair your device

with the foot pod (page 10).

For best results, the foot pod should be calibrated using the

inside lane of a regulation track or an exact distance. A

regulation track (2 laps = 0.5 mi. or 800 m) is more accurate

than a treadmill.

1Select the Orange key.

2Select Setup > ANT Sensor > Foot Pod > Calibrate >

Distance.

3Select Start to begin recording.

4Run or walk 0.5 mi. or 800 m.

5Select Stop.

Calibrating Your Foot Pod by GPS

Before you can calibrate your device, you must acquire GPS

signals, and pair your device with the foot pod (page 10).

1Select the Orange key.

2Select Setup > ANT Sensor > Foot Pod > Calibrate >

GPS.

3Select Start to begin recording.

4Run or walk approximately 0.62 mi. or 1 k.

The device informs you when you have traveled far enough.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device

with the foot pod (page 10).

Garmin recommends manual calibration if you know your

calibration factor. If you have calibrated a foot pod with another

Garmin product, you may know your calibration factor.

1Select the Orange key.

2Select Setup > ANT Sensor > Foot Pod > Calibrate >

Manual.

3Adjust the calibration factor:

• Increase the calibration factor if your distance is too low.

• Decrease the calibration factor if your distance is too high.

Using an Optional Bike Cadence Sensor

You can use the GSC 10 to send biking data to your device.

• Pair the sensor with your fēnix (page 10).

• Create a custom profile for biking (page 2).

• Update your fitness user profile information (page 9).

Device Information

Viewing Device Information

You can view the unit ID, software version, and license

agreement.

1Select the Orange key.

2Select Setup > About.

Updating the Software

NOTE: Updating the software does not erase any of your data

or settings.

1Connect your device to a computer using the USB cable.

2Go to www.garmin.com/products/webupdater.

3Follow the on-screen instructions.

Device Care

NOTICE

Do not use a sharp object to clean the device.

Avoid chemical cleaners, solvents, and insect repellents that

can damage plastic components and finishes.

Thoroughly rinse the device with fresh water after exposure to

chlorine, salt water, sunscreen, cosmetics, alcohol, or other

harsh chemicals. Prolonged exposure to these substances can

damage the case.

Avoid pressing the keys under water.

Avoid extreme shock and harsh treatment, because it can

degrade the life of the product.

Cleaning the Device

1Wipe the device using a cloth dampened with a mild

detergent solution.

2Wipe it dry.

Specifications

Battery type 500 mAh Lithium-ion battery

Battery life Up to 6 weeks

Water resistance Water resistant to 164 ft. (50 m)

Operating temperature

range

From -4ºF to 122ºF (from -20ºC to 50ºC)

Radio frequency/

protocol

2.4 GHz ANT+ wireless communications

protocol

Bluetooth® Smart device

Heart Rate Monitor Specifications

Battery type User-replaceable CR2032, 3 volts

Battery life Up to 4.5 years (1 hour per day). When the

battery is low, a message appears on your

compatible Garmin device.

Water resistance Water resistant to 98.4 ft. (30 m)

NOTE: This product does not transmit heart rate

data while swimming.

Operating

temperature range

From 23°F to 122°F (from -5°C to 50°C)

Radio frequency/

protocol

2.4 GHz ANT+ wireless communications protocol

Battery Information

The actual battery life depends on how much you use GPS,

device sensors, optional wireless sensors, and the backlight.

Battery Life Mode

16 hours Normal GPS mode

50 hours UltraTrac GPS mode

Up to 2 weeks Always On sensor mode

Up to 6 weeks Watch mode

Heart Rate Monitor Battery

WARNING

Do not use a sharp object to remove user-replaceable batteries.

Contact your local waste disposal department to properly

recycle the batteries. Perchlorate Material – special handling

may apply. Go to www.dtsc.ca.gov/hazardouswaste

/perchlorate.

Replacing the Heart Rate Monitor Battery

1Use a small Phillips screwdriver to remove the four screws

on the back of the module.

2Remove the cover and battery.

12 Device Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Fenix Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Fenix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info