Bedienungsanleitung Garmin GNX Wind (Seite 6 von 10) (Englisch)

691464

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

TWD: the wind rose is showing the true wind direction.

Single needle: ithe direction the wind is coming from.

Double needle: the direction the wind is heading to.

Steer Pilot Mode

You can use the marine instrument to help you steer using a

specific wind angle or information received from connected

sensors and a GPS device.

You can also use the marine instrument to help when tacking.

Using the Steer Pilot in AWA or TWA Mode

Before you can use the steer pilot in AWA mode, you must

connect the instrument to a wind sensor, either wirelessly or

through the NMEA 2000

network.

Before you can use the steer pilot in TWA mode, you must

connect the instrument to a wind sensor, either wirelessly or

through the NMEA 2000 network, and you must connect it to a

speed sensor or GPS device through the NMEA 2000 network.

Before you can use the steer pilot in AWA mode, you must

connect the instrument to a wind sensor through the NMEA

2000 network.

Before you can use the steer pilot in TWA mode, you must

connect the instrument to a wind sensor through the NMEA

2000 network, and you must connect it to a speed sensor or

GPS device through the NMEA 2000 network.

You can enter a specific wind-angle value and use the

instrument as a steering guide when sailing.

From an instrument screen, hold .

The instrument enters steer-pilot mode.

Select an option:

• If AWA or TWA is shown, proceed to step 4.

• If something other than AWA or TWA is shown, hold

until the text flashes.

Press or to select AWA or TWA, and press .

Press or to enter a numeric value for the wind angle to

use when steering.

Press to confirm the wind angle.

Steer the boat while keeping the needle pointing straight

ahead.

Using Steer Pilot in BTW or CTS Mode

Before you can use the steer pilot in BTW mode, you must

connect the instrument to a GPS device through the NMEA

2000 network.

Before you can use the steer pilot in CTS mode, you must

connect the instrument to a GPS device, a heading sensor, and

a speed sensor through the NMEA 2000 network.

You can use the instrument to help you steer to a waypoint on a

connected GPS device.

Begin navigating to a destination on the connected GPS

device.

From an instrument screen, hold .

The instrument enters steer-pilot mode.

Select an option:

• If BTW or CTS is shown, proceed to step 5.

• If something other than BTW or CTS is shown, hold

until the text flashes.

Press or to select BTW or CTS, and press .

Steer the boat while keeping the needle pointing straight

ahead.

Using Steer Pilot in MEM Mode

Before you can use the steer pilot in MEM mode, you must

connect the instrument to a heading sensor through the NMEA

2000 network.

The marine instrument can help you when tacking by using

stored port and starboard tack angles.

From an instrument screen, hold .

The instrument enters steer-pilot mode.

Select an option:

• If MEM is shown, proceed to step 4.

• If something other than MEM is shown, hold until the

text flashes.

Press or to select MEM, and press .

Begin tacking port or starboard.

After you make your first trim, push to store the heading

value as MEM1.

Continue tacking.

After you make your second trim, push to store the

heading value as MEM2.

Continue tacking while observing the needle.

When the needle moves from the center, it indicates the

timing for the next tacking maneuver.

The MEM1 and MEM2 values change automatically as you

are tacking.

Configuration

You can configure the instrument displays and settings using the

configuration menu.

There are two levels in the configuration menu, indicated by the

decimal value that appears in the upper-left side of the screen

when you press .

The value to the left of the decimal indicates the primary menu

category.

The value to the right of the decimal indicates the sub-menu item

within the primary menu category.

When MENU is shown, you can press or to move through the

primary menu categories.

When SUBMENU is shown, you can press or to move through

the sub-menu items within the primary menu category.

The name of the primary menu category or sub-menu item.

2 Steer Pilot Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GNX Wind Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GNX Wind

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info