Bedienungsanleitung Garmin GNX Wind (Seite 7 von 10) (Englisch)

691464

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Changing a Configuration Setting

From an instrument screen, press .

Press or to select a MENU category, and press .

Press or to select a SUBMENU category, and press .

The value in the selected category flashes.

Press or to adjust the value, and press to confirm the

setting.

Select an option:

• Press to confirm the new value and return to the

SUBMENU category.

• Press to cancel all changes and return to the

SUBMENU category.

The value in the selected category stops flashing.

Press two times to return to the instrument screens.

Adjusting the Number of Instrument Screens

You can customize a maximum of four instrument screens.

From an instrument screen, press .

Press or to select SYST, and press .

Press or to select PGES, and press .

Press or to select the number of instrument screens (1

through 4), and press to confirm the setting.

Press two times to return to the instrument screens.

Customizing an Instrument Screen

You can customize the data shown in the three main areas of

each instrument screen.

From an instrument screen, press or to select an

instrument screen to customize.

Press .

Press to select DATA.

Press or to select an option:

• Select SUBMENU 1.1 to change the lower-left (speed)

value.

• Select SUBMENU 1.2 to change the upper-left (direction)

value.

• Select SUBMENU 1.3 to change the wind rose function.

Press .

Press or to change the value.

Press to confirm the change.

Repeat steps 4 through 7 for every value or function you

need to change on the current instrument screen.

Press two times to return to the instrument screens.

Connecting to a Garmin

Wearable Device

Your compatible Garmin wearable device communicates with

the instrument using the Boat Data Garmin Connect IQ

™

app. If

this app is not already installed on your wearable device, you

must download the app from the Garmin Connect IQ store. See

the owner's manual for your Garmin wearable device for more

information about Connect IQ apps.

You can connect to a compatible Garmin wearable device, such

as a quatix

5, to view wind information from the instrument.

From an instrument screen, press .

Press or to select WEAR, and press .

Select an option:

• If the setting for ENBL is set to OFF, press , press or

to select ON, and press .

• If the setting for ENBL is set to ON, proceed to the next

step.

Press or to select CONN, and press .

ADD appears on the screen.

Launch the Boat Data app on your Garmin wearable device

to complete the connection to the instrument.

Configuration Menus

This section provides details for the items in the configuration

menu, organized by menu and sub-menu decimal values.

1.0 DATA Configuration Settings

1.1 Lower data field configuration: Changes the speed type

on the current instrument page.

1.2 Upper data field configuration: Changes the wind direction

or angle type on the current instrument page.

1.3 Wind rose configuration: Changes the function of the wind

rose on the current instrument page.

2.0 FILT Configuration Settings

In the filter configuration menu, you can adjust damping of the

data received from the sensor before it is shown in each data

category (2.1 through 2.9).

The higher you set the update rate (0 through 9) for each data

category, more the data is dampened to remove the more

extreme readings. For example, setting a higher filter for TWS

may provide a more stable wind-speed reading in gusty

conditions.

The glossary defines the data-type abbreviations used in this

menu (Abbreviation Glossary, page 4).

3.0 UNIT Configuration Settings

3.1 WIND: Changes the units of measure used for wind speed.

3.2 BSP: Changes the units of measure used for boat speed.

4.0 SENS Configuration Settings

4.1 WIND: Turns data from the connected wireless wind sensor

on or off. When off, data from the connected wireless wind

sensor is not transmitted over the NMEA 2000 network.

4.2 ANGL: Adjusts the angle of the wind sensor to align with the

front of the boat.

4.3 RSSI: Shows the signal strength between the instrument

and the wireless wind sensor.

4.4 BSP%: Adjusts the calibration of boat speed information

shown on the instrument.

NOTE: This adjustment affects the information as shown on

the marine instrument only. Other devices using speed

information from the NMEA 2000 network must be calibrated

separately, if needed.

5.0 WEAR Configuration Settings

5.1 ENBL: Enables the connection to a compatible Garmin

wearable device.

5.2 CONN: Initiates a connection to a compatible Garmin

wearable device.

6.0 SYST Configuration Settings

6.1 LGHT: Adjusts the backlight level on a scale of 0 through

100%.

6.2 COLR: Sets the color of the instrument display.

Settings C00 through C06 are the custom colors available

locally on the marine instrument.

Setting C07 is a custom-color setting controlled by other

instruments on the NMEA 2000 network.

6.3 BEEP: Tuns the key-press sounds on or off.

6.4 POWR: Allows you to change how the instrument turns on.

The AuT option turns the instrument on automatically when

the NMEA 2000 network turns on.

Configuration 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GNX Wind Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GNX Wind

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info