Bedienungsanleitung Garmin GPSMAP 276Cx (Seite 14 von 18) (Englisch)

691374

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

• Tracks (GPX/FIT) records your activity as both a

traditional track that can be viewed on the map and used

for navigation, and as an activity with fitness information.

Trip Recording: Sets a trip recording option.

Recorded Data Reset: Sets a reset option. The Track and Trip

option resets the track and trip data when you finish the

active track. The Prompted option prompts you to select the

data to reset.

Altimeter Settings

From the main menu, select Setup > Altimeter.

Barometer Mode: Sets the barometer mode. The Variable

Elevation option allows the barometer to measure changes in

elevation while you are moving. The Fixed Elevation option

assumes the device is stationary at a fixed elevation. The

barometric pressure should change only due to weather.

Plot Type: Allows you to view elevation changes over a period

of time or distance, barometric pressure over a period of

time, or ambient pressure changes over a period of time.

Auto Calibration: Automatically calibrates the altimeter each

time an activity is started. The device continues to

automatically calibrate the altimeter as long as the device

receives GPS signals and the Continuous calibration option

is turned on.

Calibrate Altimeter: Allows you to calibrate the barometric

altimeter when you know the correct elevation or the correct

barometric pressure (Calibrating the Barometric Altimeter,

page 7).

Sound Settings

From the main menu, select Setup > Sound.

Beeper: Sets the beeper to sound for alarms and selections.

Attention Tone: Sets the tone that sounds before voice

prompts.

Voice Prompt: Sets the voice prompt to sound for Guidance

and Status, Route Guidance Only, or No Voice Prompts.

Voice Language: Sets the language for voice prompts.

Speaker Volume: Sets the external speaker or headphone

volume level.

ANT+

Sensor Settings

For more information about optional fitness accessories, see

Optional Fitness Accessories, page 10.

Timer Settings

From the main menu, select Setup > Timer.

User: Allows you to set the timer to count up or count down. You

can also reset the timer and turn it off. You can enter a time

to use when counting up or down.

Marine: Sets the timer to appear on the compass page in

Marine mode.

Time Settings

Select Setup > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Time Zone: Sets the time zone for the device. Automatic sets

the time zone automatically based on your GPS position.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, depth, temperature, pressure, and vertical speed.

Select Setup > Units.

Select a measurement type.

Select a unit of measure.

Location Settings

NOTE: You should not change the position format or the map

datum coordinate system unless you are using a map or chart

that specifies a different position format.

From the main menu, select Setup > Location.

Position Format: Sets the position format in which a location

reading appears.

Map Datum: Sets the coordinate system on which the map is

structured.

Map Spheroid: Shows the coordinate system the device is

using. The default coordinate system is WGS 84.

Heading: Sets the direction references used in calculating

heading information. The Auto Mag. Var. option sets the

magnetic declination for your location automatically. The True

option sets geographic north as the heading reference. The

Grid option sets grid north (000º) as the heading reference.

The User Mag. Var. option allows you to manually set the

magnetic variation at your location.

Restoring All Default Settings

You can reset all settings back to the factory default settings.

From the main menu, select Setup > System > MENU > All

Unit Defaults > Yes.

Device Information

Device Care

NOTICE

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Avoid chemical cleaners, solvents, and insect repellents that can

damage plastic components and finishes.

Secure the weather cap tightly to prevent damage to the USB

port.

Cleaning the Device

NOTICE

Even small amounts of sweat or moisture can cause corrosion

of the electrical contacts when connected to a charger.

Corrosion can prevent charging and data transfer.

Wipe the device using a cloth dampened with a mild

detergent solution.

Wipe it dry.

After cleaning, allow the device to dry completely.

Optional Fitness Accessories

You can use optional fitness accessories including a heart rate

monitor or a cadence sensor with your device. These

accessories use ANT+ wireless technology to send data to the

device.

Before you can use the fitness accessory with your device, you

must install the accessory according to the instructions included

with the accessory.

Pairing Your ANT+ Sensors

Before you can pair, you must put on the heart rate monitor or

install the sensor.

Pairing is the connecting of ANT+ wireless sensors, for example,

connecting a heart rate monitor with your device.

Bring the device within 3 m (10 ft.) of the sensor.

10 Device Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 276Cx Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 276Cx

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info