Bedienungsanleitung Garmin GPSMAP 276Cx (Seite 15 von 18) (Englisch)

691374

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

NOTE: Stay 10 m (30 ft.) away from other ANT+ sensors

while pairing.

From the main menu, select Setup > ANT Sensor.

Select your sensor.

Select Search For New.

When the sensor is paired with your device, the sensor status

changes from Searching to Connected.

Tips for Pairing ANT+ Accessories with Your Garmin

Device

• Verify that the ANT+ accessory is compatible with your

Garmin device.

• Before you pair the ANT+ accessory with your Garmin

device, move 10 m (32.9 ft.) away from other ANT+

accessories.

• Bring the Garmin device within range 3 m (10 ft.) of the ANT+

accessory.

• After you pair the first time, your Garmin device automatically

recognizes the ANT+ accessory each time it is activated. This

process occurs automatically when you turn on the Garmin

device and only takes a few seconds when the accessories

are activated and functioning correctly.

• When paired, your Garmin device receives data from only

your accessory, and you can go near other accessories.

Data Management

You can store files on your device. The device has a memory

card slot for additional data storage.

NOTE: The device is not compatible with Windows

95, 98, Me,

Windows NT

, and Mac

OS 10.3 and earlier.

File Types

The handheld device supports these file types:

• Files from BaseCamp or HomePort

™

. Go to www.garmin.com

/trip_planning.

• GPX route, track, and waypoint files.

• GPX geocache files.

• JPEG photo files.

• GPI custom POI files from the Garmin POI Loader. Go to

www.garmin.com/products/poiloader.

• FIT files for exporting to Garmin Connect.

Installing a Memory Card

You can install a microSD

memory card for additional storage

or pre-loaded maps.

Turn the D-ring counter-clockwise, and pull up to remove the

cover.

Remove the batteries.

In the battery compartment, slide the card holder

to the left

and lift up.

Place the memory card

with the gold contacts facing down.

Close the card holder.

Slide the card holder to the right to lock it.

Replace the batteries.

Replace the battery cover, and turn the D-ring clockwise.

Connecting the Device to Your Computer

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather

cap, and the surrounding area before charging or connecting to

a computer.

Pull up the weather cap from the USB port.

Plug the small end of the USB cable into the USB port on the

device.

Plug the large end of the USB cable into a computer USB

port.

Your device and memory card (optional) appear as

removable drives in My Computer on Windows computers

and as mounted volumes on Mac computers.

Transferring Files to Your Device

Connect the device to your computer.

On Windows computers, the device appears as a removable

drive or a portable device, and the memory card may appear

as a second removable drive. On Mac computers, the device

and memory card appear as mounted volumes.

NOTE: Some computers with multiple network drives may not

display device drives properly. See your operating system

documentation to learn how to map the drive.

On your computer, open the file browser.

Select a file.

Select Edit > Copy.

Open the portable device, drive, or volume for the device or

memory card.

Browse to a folder.

Select Edit > Paste.

The file appears in the list of files in the device memory or on

the memory card.

Deleting Files

NOTICE

If you do not know the purpose of a file, do not delete it. Your

device memory contains important system files that should not

be deleted.

Open the Garmin drive or volume.

If necessary, open a folder or volume.

Select a file.

Press the Delete key on your keyboard.

Disconnecting the USB Cable

If your device is connected to your computer as a removable

drive or volume, you must safely disconnect your device from

your computer to avoid data loss. If your device is connected to

your Windows computer as a portable device, it is not necessary

to safely disconnect.

Complete an action:

• For Windows computers, select the Safely Remove

Hardware icon in the system tray, and select your device.

• For Mac computers, drag the volume icon to the trash.

Disconnect the cable from your computer.

Specifications

Battery type Rechargeable lithium-ion

Battery life (based on 70%

backlight brightness with

GPS on)

Up to 16 hr. with lithium-ion battery

Up to 8 hr. with AA batteries

Water rating IEC 60529 IPX7*

Device Information 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 276Cx Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 276Cx

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info