Bedienungsanleitung Garmin GPSMAP 740 (Seite 63 von 100) (Englisch)

501972

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

GPSMAP 700 Series Owner’s Manual 59

Radar

Showing AIS Vessels on the Radar Screen

AIS requires the use of an external AIS device and active transponder signals from other vessels.

You can congure how other vessels appear on the Radar screen. If any setting (except the AIS display range)

is congured for one radar mode, the setting is applied to every other radar mode. The details and projected

heading settings congured for one radar mode are applied to every other radar mode and to the Radar

Overlay.

1. From the Home screen, select .

2. Select , , , or .

3. Select  > > .

4. Complete an action:

• Select  to indicate the distance from your location within which AIS vessels appear,

and select a distance.

• Select  >  to show details about AIS-activated vessels.

• Select , enter the projected heading time for AIS-activated vessels, and select .

• Select  to show the tracks of AIS vessels, and select the length of the track that appears using a

trail.

VRM and EBL

The variable range marker (VRM) and the electronic bearing line (EBL) measure the distance and bearing

from your boat to a target object. On the Radar screen, the VRM appears as a circle that is centered on the

present location of your boat, and the EBL appears as a line that begins at the present location of your boat and

intersects the VRM. The point of intersection is the target of the VRM and the EBL.

Showing the VRM and the EBL

The VRM and the EBL congured for one mode are applied to all other radar modes.

1. From the Home screen, select .

2. Select , , or .

3. Select  > .

Adjusting the VRM and the EBL

You must show the VRM and the EBL before you can adjust them (page 59).

You can adjust the diameter of the VRM and the angle of the EBL, which moves the intersection point of the

VRM and the EBL. The VRM and the EBL congured for one mode are applied to all other radar modes.

1. From the Home screen, select .

2. Select , , or .

3. Select  >  > .

4. Touch a new location for the intersection point of the VRM and the EBL.

5. Select .

Measuring the Range and Bearing to a Target Object

You must show the VRM and the EBL before you can adjust them (page 59).

The VRM and the EBL congured for one mode are applied to all other radar modes.

1. From the Home screen, select .

2. Select , , or .

3. Select  > > .

4. Touch the target location.

The range and the bearing to the target location appear in the upper-left corner of the screen.

5. Select .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 740 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 740

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info