Bedienungsanleitung Garmin GPSMAP 740 (Seite 65 von 100) (Englisch)

501972

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

GPSMAP 700 Series Owner’s Manual 61

Radar

6. Select , , , or .

The route appears as a magenta line, with the starting point, the destination, and turns indicated.

7. Review the course indicated by the magenta line.

8. Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other

obstacles.

Navigating Parallel to a Saved Route on the Radar Screen

Before you can browse a list of routes and navigate to one of them, you must record and save at least one route

(page 28). Navigation lines must be showing in order to view a route on the Radar screen (page 68).

1. From the Home screen, select  > .

2. Select a route.

3. Select  > .

4. Complete an action:

• Select  to navigate the route from the starting point used when the route was created, to

the left of the original route.

• Select  to navigate the route from the starting point used when the route was

created, to the right of the original route.

• Select  to navigate the route from the destination point used when the route was

created, to the left of the original route.

• Select  to navigate the route from the destination point used when the route was

created, to the right of the original route.

5. Enter the offset distance.

6. Select .

7. From the Home screen, select .

8. Select , , , or .

The route appears as a magenta line, with the starting point, the destination, and turns indicated.

9. Review the course indicated by the magenta line.

10. Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other

obstacles.

About the Radar Overlay

The Radar Overlay superimposes radar information on the Navigation chart or the Fishing chart. Data appears

on the Radar Overlay based on the most-recently used radar mode (Cruising, Harbor, Offshore, or Sentry),

and all settings congurations applied to the Radar Overlay are also applied to the last-used radar mode. For

example, if you use Harbor mode and then you switch to the Radar Overlay, the Radar Overlay would show

Harbor mode radar data. If you changed the gain setting using the Radar Overlay menu, the gain setting for

Harbor mode would change automatically.

Radar Overlay on the Navigation Chart

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 740 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 740

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info