Bedienungsanleitung Garmin GPSMAP 800 (Seite 45 von 52) (Englisch)

544282

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Position Format: Sets the position format in which a given

location reading appears. Do not change this setting unless

you are using a map or chart that specifies a different

position format.

Map Datum: Sets the coordinate system on which the map is

structured. Do not change this setting unless you are using a

map or chart that specifies a different map datum.

Pressure Reference Time: Sets the reference time used to

calculate the barometer trend. The trend is indicated in the

barometer field.

Time Format: Sets a 12-hour, 24-hour, or UTC time format.

Time Zone: Sets the time zone, or allows automatic selection

based on GPS location.

Navigation Settings

NOTE: Some settings and options require additional charts or

hardware.

Select Settings > Navigation.

Route Labels: Sets the type of labels shown with route turns on

the map.

Auto Guidance: Sets the parameters the chartplotter uses

when calculating an Auto Guidance path, when you are using

some premium maps.

Turn Transition Activ.: Sets the turn transition to be calculated

based on time or distance.

Turn Transition Time: Sets how many minutes before the turn

that you transition to it as the next leg, when Time is selected

for the Turn Transition Activ. setting. You can raise this value

to help improve the accuracy of the autopilot when navigating

a route or an Auto Guidance path with many frequent turns or

at higher speeds. For straighter routes or slower speeds,

lowering this value can improve autopilot accuracy.

Turn Transition Dist.: Sets how far before the turn that you

transition to it as the next leg, when Distance is selected for

the Turn Transition Activ. setting. You can raise this value to

help improve the accuracy of the autopilot when navigating a

route or an Auto Guidance path with many frequent turns or

at higher speeds. For straighter routes or slower speeds,

lowering this value can improve autopilot accuracy.

Route Start: Selects a starting point for route navigation.

Other Vessel Settings

When your compatible chartplotter is connected to an AIS

device or VHF radio, you can set up how other vessels are

displayed on the chartplotter.

Select Settings > Other Vessels.

AIS: Enables and disables AIS signal reception.

DSC: Enables and disables digital selective calling (DSC).

AIS Alarm: Sets the collision alarm (Setting the Safe-Zone

Collision Alarm, page 6 and Enabling AIS Transmission Test

Alerts, page 7).

Restoring the Original Chartplotter Factory

Settings

NOTE: This procedure deletes all settings information you have

entered.

Select Settings > System > System Information > Factory

Settings.

Chartplotter Data Management

Copying Waypoints, Routes, and Tracks

from HomePort to a Chartplotter

Before you can copy data to the chartplotter, you must have the

latest version of the HomePort software program loaded on your

computer and a memory card installed in the chartplotter.

Copy the data from HomePort to the prepared memory card.

For more information, see the HomePort help file.

Copying Data from a Memory Card

Insert a memory card into a card slot.

Select Nav Info > Manage Data > Data Transfer.

If necessary, select the memory card to copy data to.

Select an option:

• To transfer data from the memory card to the chartplotter

and combine it with existing user data, select Merge from

Card.

• To transfer data from the memory card to the chartplotter

and overwrite existing user data, select Replace from

Card.

Select the file name.

Copying Waypoints, Routes, and Tracks to a

Memory Card

Insert a memory card into the card slot.

Select Nav Info > Manage Data > Data Transfer > Save to

Card.

If necessary, select the memory card to copy data to.

Select an option:

• To create a new file, select Add New File, and enter a

name.

• To add the information to an existing file, select the file

from the list.

Selecting a File Type for Third-Party

Waypoints and Routes

You can import and export waypoints and routes from third-party

devices.

Select Nav Info > Manage Data > Data Transfer > File

Type.

Select GPX.

To transfer data with Garmin devices again, select the ADM file

type.

Copying Built-In Maps to a Memory Card

You can copy maps from the chartplotter to a memory card for

use with HomePort.

Insert a memory card into the card slot.

Select Nav Info > Manage Data > Data Transfer.

Select Copy Built-In Map.

Backing Up Data to a Computer

Insert a memory card into the card slot.

Select Nav Info > Manage Data > Data Transfer > Save to

Card.

Select a file name from the list, or select Add New File.

Select Save to Card.

Remove the memory card, and insert it into a card reader

attached to a computer.

Open the Garmin\UserData folder on the memory card.

Chartplotter Data Management 39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 800 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info