Bedienungsanleitung Garmin GPSMAP 8012 (Seite 47 von 62) (Englisch)

522262

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

NOTE:

This feature is not available on all devices and in all

subscriptions.

Select

Charts >

Visibility

Viewing Forecast Visibility Information for Another

Time Period

Select Charts > Visibility.

Select an option:

• To view the visibility forecast for the next 36 hours, in 12-

hour increments, select Next Forecast multiple times.

• To view the visibility forecast for the previous 36 hours, in

12-hour increments, select Previous Forecast multiple

times.

Viewing Buoy Reports

Report readings are taken from buoys and coastal observation

stations. These readings are used to determine air temperature,

dew point, water temperature, tide, wave height and period,

wind direction and speed, visibility, and barometric pressure.

From a weather chart, select .

Select

Buoy.

Viewing Local Weather Information near a Buoy

You can select an area near a buoy to view forecast information.

From a weather chart, select a location on the chart.

Select

Local Weather.

Select an option:

• To view present weather conditions from a local weather

service, select

Current Cond..

• To view a local weather forecast, select Forecast

• To view surface wind and barometric pressure information,

select

Sea Surface.

• To view wind and wave information, select Marine

Bulletin

Creating a Waypoint on a Weather Chart

From a weather chart, select a location.

Select

Create Waypoint.

Weather Overlay

The weather overlay superimposes weather and weather-related

information on the Navigation chart, the Fishing chart, and the

Perspective 3D chart view. The Navigation chart and the Fishing

chart can show weather radar, height of cloud tops, lightning,

weather buoys, county warnings, and hurricane warnings. The

Perspective 3D chart view can show weather radar.

Weather overlay settings configured for use on one chart are not

applied to another chart. The weather overlay settings for each

chart must be configured separately.

NOTE:

The offshore Fishing chart is available with premium

charts, in some areas.

Turning On the Weather Overlay on a Chart

From the Navigation chart or Fishing chart, select Menu >

Chart Setup > Weather

> Weather > On

Weather Overlay Settings on the Navigation Chart

From the Navigation chart, select Menu > Chart Setup >

Weather.

Weather: Turns on and off the weather overlay.

Precipitation: Shows precipitation data.

Cloud Cover: Shows cloud cover data.

Visibility: Shows visibility data.

Buoys: Shows weather buoys.

Legend: Shows the weather legend.

Weather Overlay Settings on the Fishing Chart

From the Fishing chart, select Menu > Chart Setup > Weather.

Precipitation: Shows precipitation radar.

Sea Temperature: Shows sea temperature data.

Buoys: Shows weather buoys.

Legend: Shows the weather legend.

Viewing Weather Subscription Information

You can view information about the weather services you have

subscribed to and how many minutes have passed since the

data for each service was updated.

From a weather chart, select

Menu > Weather

Subscription.

Viewing Video

Before you can view video, you must connect to a compatible

source.

Compatible devices include video devices connected to the

ports on the chartplotter or to the Garmin

Marine Network, as

well as supported network (IP-based) video cameras, encoders,

and thermal cameras.

Select

A/V, Gauges, Controls > Video.

Selecting a Video Source

From the video screen, select Menu >

Source

Select the source of the video feed.

Alternating Among Multiple Video Sources

If you have two or more video sources, you can alternate

between them using a specific time interval.

From the video screen, select Menu

> Source > Alternate

Select

Time, and select the amount of time each video

appears.

Select

Source, and select the video sources to add to the

alternating sequence.

Networked Video Devices

NOTICE

A Garmin Power over Ethernet (PoE) Isolation Coupler (P/N

010-10580-10) must be used when connecting a PoE device,

such as a FLIR

camera, to a

Garmin Marine Network.

Connecting a PoE device directly to a Garmin Marine Network

chartplotter damages the Garmin chartplotter and may damage

the PoE device.

Before you can view and control video devices such as IP

cameras, encoders, and thermal cameras using your

chartplotter, you must have a compatible video device

connected to your chartplotter, and you must have a marine

network cable Power over Ethernet (PoE) isolation coupler. Go

to www.garmin.com for a list of compatible devices or to

purchase a PoE Isolation Coupler.

You can connect multiple supported video cameras and up to

two video encoders to the Garmin Marine Network. You can

select and view up to four video sources at once. Chartplotters

with multiple composite built-in video inputs can display a single

built-in video input only. When the cameras are connected, the

network detects them automatically and displays them in the

source list.

Using Video Presets on Networked Video Cameras

You can save, name, and activate video presents for each

networked video source.

Viewing Video 39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8012 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8012

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info