Bedienungsanleitung Garmin GPSMAP 8012 (Seite 49 von 62) (Englisch)

522262

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

the dimensions provided by the connected video device,

and it may not fill the entire screen.

• To show the video using a standard aspect ratio, select

Aspect

> Standard

• To adjust the brightness, select Brightness

, and select

Up, Down, or Auto.

• To adjust the color saturation, select

Saturation, and

select Up, Down, or Auto.

• To adjust the contrast, select

Contrast, and select Up,

Down, or Auto.

• To allow the chartplotter to automatically select the source

format, select Standard

> Auto

Configuring the PC Display

Before you can configure the PC display mode, you must set the

video source to analog or digital PC.

When in PC display mode, select anywhere on the screen.

Select an option:

• To adjust the screen brightness, select the brightness

arrows.

• To adjust the screen contrast, select the contrast arrows.

Exiting PC Display Mode

When in PC display mode, select anywhere on the screen.

Select the display mode icon in the upper-left corner.

The video source changes to Video 1.

Controlling the VIRB

Action Camera with the

Chartplotter

Before you can control a

VIRB action camera with the

chartplotter, you must connect the devices using a wireless

connection (Connecting a Wireless Device to the Chartplotter,

page 46).

You can connect up to five VIRB action cameras to the

chartplotter.

After you connect the VIRB action camera with the chartplotter,

a new option is added to A/V, Gauges, Controls

. You can start

and stop recording on the

VIRB action camera using the

chartplotter.

NOTE:

The

VIRB image shown on the chartplotter is a in a

lower resolution than the VIRB action camera records. To view

the high-resolution video, view the video on a computer or

television.

Select A/V, Gauges, Controls > VIRB®.

Select an option:

• To take a still photograph, select .

• To begin recording, select .

When recording, the remaining recording memory is

shown.

• To stop recording, select again.

• If you have more than one VIRB action camera

connected, use the arrows to select a different action

camera to control.

• To view stored videos or images, select .

VIRB Action Camera Settings

Select A/V, Gauges, Controls >

VIRB® > Menu

Name: Allows you to enter a new name for the VIRB action

camera.

Recording: Starts and stops recording.

Take Photo: Takes a still photograph.

Sleep: Puts the VIRB action camera into a low power mode to

conserve battery power.

VIRB Action Camera Video Setup Settings

Select A/V, Gauges, Controls >

VIRB® > Menu > Video

Setup

Aspect: Sets the video aspect ratio.

Video Mode: Sets the video mode. For example, you can select

the Slow-Mo option to shoot slow motion videos.

Video Size: Sets the size or pixel dimensions of videos.

Video FPS: Sets the frames per second.

Photo Size: Sets the size or pixel dimensions of photos.

Field of View: Sets the zoom level.

Adding the VIRB Action Camera Controls to Other

Screens

Before you can control a VIRB action camera with the

chartplotter, you must connect the devices using a wireless

connection (Connecting a Wireless Device to the Chartplotter,

page 46).

You can add the VIRB action camera control bar to other

screens. This allows you to start and stop recording from other

functions in the chartplotter.

Open the screen to which you want to add the VIRB action

camera control bar.

Select Menu

> Edit Overlays > Bottom Bar > VIRB Bar

When viewing a screen that has the VIRB action camera

controls, you can select to open the full screen view of the

VIRB action camera.

Controlling the VIRB Action Camera Video Playback

You can view VIRB action camera video and images using the

chartplotter.

NOTE: The VIRB playback on the chartplotter is shown in the

same quality as the live view on the chartplotter. To view the

high-resolution video, view the video on a computer or

television.

From the VIRB® screen, select .

Wait a few seconds for the thumbnail images to load.

Select a video or image.

Control the playback using the on-screen buttons or menu

options:

• To stop the video, select .

• To pause the video, select .

• To replay the video, select .

• To play the video, select .

• To skip ahead or back in the video, drag the slider.

Deleting a VIRB Video

You can delete a video or image from the VIRB action camera.

Open the VIRB video or image to delete.

Select Menu

> Delete File

Starting a VIRB Video Slideshow

You can view a slideshow of the videos and images on the VIRB

action camera.

From the VIRB®

screen, select

Wait a few seconds for the thumbnail images to load.

Select a video or image.

Select Menu

> Start Slideshow

To stop the slideshow, selcet Menu > Stop Slideshow.

Viewing Video 41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8012 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8012

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info