Bedienungsanleitung Garmin GPSMAP 8417 MFD (Seite 23 von 62) (Englisch)

658523

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Select an option:

• Select the time the active track began.

• Select

Entire Log.

Review the course indicated by the colored line.

Follow the colored line, steering to avoid land, shallow water,

and other obstacles.

Clearing the Active Track

Select Info > User Data > Tracks > Clear Active Track.

The track memory is cleared, and the active track continues

to be recorded.

Managing the Track Log Memory During Recording

Select Info >

User Data > Tracks > Active Track Options

Select Record Mode

Select an option:

• To record a track log until the track memory is full, select

Fill

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select Info

> User Data > Tracks > Active Track Options >

Interval > Interval

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point. This is the recommended

recording option.

Boundaries

Boundaries allow you to avoid or remain in designated areas in

a body of water. You can set an alarm to alert you when you

enter or exit a boundary.

You can create boundary areas, lines, and circles using the

map. You can also convert saved tracks and routes into

boundary lines. You can create a boundary area using

waypoints by creating a route from the waypoints, and

converting the route into a boundary line.

You can select a boundary to act as the active boundary. You

can add the active boundary data to the data fields on the chart.

Creating a Boundary

Select Info

> User Data > Boundaries > New Boundary

Select a boundary shape.

Follow the on-screen instructions.

Converting a Route to a Boundary

Before you can convert a route to a boundary, you must create

and save at least one route (Creating and Saving a Route,

page 12).

Select Info

> User Data > Routes & Auto Guidance Paths

Select a route.

Select Review

> Edit Route > Save as Boundary

Converting a Track to a Boundary

Before you can convert a track to a boundary, you must record

and save at least one track (Saving the Active Track, page 14).

Select Info

> User Data > Tracks > Saved Tracks

Select a track.

Select Select

> Edit Track > Save as Boundary

Editing a Boundary

Select Info

> User Data > Boundaries

Select a boundary.

Select Review

> Edit Boundary

Select an option:

• To edit the appearance of the boundary on the chart,

select Display Options.

• To change the boundary lines or name, select Edit

Boundary.

• To edit the boundary alarm, select Alarm

Setting a Boundary Alarm

Boundary alarms alert you when you are within a specified

distance of a set boundary.

Select Info >

User Data > Boundaries

Select a boundary.

Select Alarm > On.

Enter a distance.

Deleting a Boundary

Select Info

> User Data > Boundaries

Select a boundary.

Select Review > Edit Boundary

> Delete

Synchronizing User Data Across the

Garmin

Marine Network

NOTICE

Before you synchronize the user data across the network, you

should backup your user data to prevent possible data loss. See

Backing Up Data to a Computer, page 47.

You can share waypoints, tracks, and routes with all compatible

devices connected to the Garmin

Marine Network (Ethernet)

automatically.

NOTE: This feature is not available on all models.

Select Settings > Preferences >

User Data Sharing > On

If a change is made to a waypoint, track, or route on one

chartplotter, that data is synchronized automatically across all

chartplotters on the Ethernet network.

Deleting All Saved Waypoints, Routes, and

Tracks

Select

Info

> User Data > Clear User Data > All > OK

Sailing Features

Setting the Vessel Type

You can select your boat type to configure the chartplotter

settings and to use features customized for your boat type.

Select Settings > My Vessel > Vessel Type.

Select an option.

Sail Racing

You can use the device to increase the likelihood that your boat

will cross the start line of a race exactly when the race begins.

When you synchronize the race timer with the official race

Sailing Features 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8417 MFD Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8417 MFD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info