Bedienungsanleitung Garmin GPSMAP 8417 MFD (Seite 39 von 62) (Englisch)

658523

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Man-Overboard Distress Calls Initiated from a VHF

Radio

When the chartplotter is connected to a compatible VHF radio

with NMEA 2000, and you initiate a man-overboard DSC

distress call from the radio, the chartplotter shows the man-

overboard screen and prompts you to navigate to the man-

overboard point. If you have a compatible autopilot system

connected to the network, the chartplotter prompts you to start a

Williamson’s turn to the man-overboard point.

If you cancel the man-overboard distress call on the radio, the

chartplotter screen prompting you to activate navigation to the

man-overboard location disappears.

Man-Overboard and SOS Distress Calls Initiated from

the Chartplotter

When your chartplotter is connected to a Garmin

NMEA 2000

compatible radio and you mark an SOS or man-overboard

location, the radio shows the Distress Call page so you can

quickly initiate a distress call.

For information on placing distress calls from your radio, see the

VHF radio owner’s manual. For information about marking an

MOB or SOS location, see

Marking an SOS Location,

page

11.

Position Tracking

When you connect the chartplotter to a VHF radio using NMEA

0183, you can track vessels that send position reports.

This feature is also available with NMEA 2000, when the vessel

sends the correct PGN data (PGN 129808; DSC Call

Information).

Every position report call received is logged in the DSC list

(

DSC List

, page

30).

Viewing a Position Report

Select Info > DSC List.

Select a position-report call.

Select

Review.

Select an option:

• To switch to a Navigation chart marking the location,

select Next Page.

• To view the position report details, select Previous Page.

Navigating to a Tracked Vessel

Select Info

> DSC List

Select a position-report call.

Select Review

> Navigate To

Select

Go To or Route To.

Creating a Waypoint at the Position of a Tracked

Vessel

Select Info > DSC List.

Select a position-report call.

Select Review

> Create Waypoint

Editing Information in a Position Report

Select Info > DSC List.

Select a position-report call.

Select Review >

Edit

• To enter the name of the vessel, select Name

• To select a new symbol, select Symbol, if available.

• To enter a comment, select Comment.

• To show a trail line for the vessel if your radio is tracking

the position of the vessel, select Trail.

• To select a color for the trail line, select Trail Line.

Deleting a Position-Report Call

Select Info >

DSC List

Select a position-report call.

Select Review > Clear Report.

Viewing Vessel Trails on the Chart

You can view trails for all tracked vessels on some chart views.

By default, a black line indicates the path of the vessel, a black

dot indicates each previously reported position of a tracked

vessel, and a blue flag indicates the last reported position of the

vessel.

From a chart or 3D chart view, select Menu

> Chart Setup >

Other Vessels > DSC > DSC Trails

Select the number of hours to show tracked vessels on the

chart.

For example, if you select

4 Hours, all trail points that are

less than four hours old appear for all tracked vessels.

Individual Routine Calls

When you connect the chartplotter to a

Garmin VHF radio, you

can use the chartplotter interface to set up an individual routine

call.

When setting up an individual routine call from your chartplotter,

you can select the DSC channel on which you want to

communicate. The radio transmits this request with your call.

Selecting a DSC Channel

NOTE: The selection of a DSC channel is limited to those

channels that are available in all frequency bands. The default

channel is 72. If you select a different channel, the chartplotter

uses that channel for subsequent calls until you call using

another channel.

Select Info

> DSC List

Select a vessel or a station to call.

Select Review

> Call with Radio > Channel

Select an available channel.

Making an Individual Routine Call

NOTE:

When initiating a call from the chartplotter, if the radio

does not have an MMSI number programmed, the radio will not

receive call information.

Select Info > DSC List.

Select a vessel or a station to call.

Select Review

> Call with Radio

If necessary, select Channel

, and select a new channel.

Select

Send.

The chartplotter sends information about the call to the radio.

On your

Garmin VHF radio, select Call.

Making an Individual Routine Call to an AIS Target

From a chart or 3D chart view, select an AIS target.

Select AIS Vessel > Call with Radio.

If necessary, select

Channel, and select a new channel.

Select

Send.

The chartplotter sends information about the call to the radio.

On your

Garmin VHF radio, select Call.

Gauges and Graphs

The gauges and graphs provide various information about the

engine and environment. To view the information, a compatible

transducer or sensor must be connected to the network.

Gauges and Graphs 31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP 8417 MFD Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8417 MFD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info