Bedienungsanleitung Garmin GPSMAP 8600 serie (Seite 50 von 64) (Englisch)

658282

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Select an option:

• To turn off the audio, select Off.

The icon appears on the video screen.

• To play the HDMI audio, select On

The

icon appears on the video screen.

• To always play the HDMI audio, even when you are not

viewing the HDMI video, select Always On

The

icon appears on the video screen.

Device Configuration

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the

power is applied. Otherwise, you must turn on the chartplotter by

pressing

Select Settings

> System > Auto Power Up

NOTE:

When Auto Power Up is On, and the chartplotter is

turned off using

, and power is removed and reapplied

within less than two minutes, you may need to press to

restart the chartplotter.

System Settings

Select

Settings

> System

Sounds and Display: Adjusts the display and audio settings.

GPS: Provides information about the GPS satellites and

settings.

System Information: Provides information about the devices on

the network and the software version.

Station Information: Adjusts the setup of the station.

Auto Power Up: Controls what turns on automatically when

power is applied.

Simulator: Turns the simulator on or off and allows you to set

the time, date, speed, and simulated location.

Sounds and Display Settings

Select Settings > System >

Sounds and Display

Beeper: Turns on and off the tone that sounds for alarms and

selections.

Backlight: Sets the backlight brightness. You can select the

Auto

option to adjust the backlight brightness automatically

based on the ambient light.

Backlight Sync: Synchronizes the backlight brightness of other

chartplotters in the station.

Color Mode: Sets the device to display day or night colors. You

can select the Auto option to allow the device to set day or

night colors automatically based on the time of day.

Video Out Aspect: Sets the video aspect ratio. The video

cannot stretch beyond the dimensions provided by the

connected video device, and it may not fill the entire screen.

Startup Image: Sets the image that appears when you turn on

the device.

GPS Settings

Select Settings >

System > GPS

Skyview: Shows the relative position of GPS satellites in the

sky.

Settings

> Speed Filter

: Averages the speed of your vessel

over a short period of time for smoother speed values.

Settings > WAAS/EGNOS: Turns on or off WAAS (in North

America) or EGNOS (in Europe), which can provide more-

accurate GPS position information. When using WAAS or

EGNOS, the device may take longer to acquire satellites.

Settings

> GLONASS

: Turns on or off GLONASS usage

(Russia satellite system). When the system is used in

situations with poor sky visibility, this configuration can be

used in combination with GPS to provide more accurate

position information.

Source: Allows you to select the preferred source for GPS.

Station Settings

Select Settings > System >

Station Information

Change Station: Sets the entire station to a new set of defaults

based on the location of this station. You can also select to

use this display as a stand-alone, individual display, instead

of grouping it with other displays to make a station.

GRID™ Pairing: Allows you to pair a GRID

™

remote input

device with this station.

Display Order: Sets the order of the displays, which is

important when using a GRID

remote input device.

Autopilot Enabled: Allows you to control the autopilot from this

device.

Reset Layouts: Restores the factory default view for the layouts

in this station.

Reset Stations: Restores the factory default layouts for all

displays in the station.

Viewing System Software Information

You can view the software version, the basemap version, all

supplemental map information (if applicable), the software

version for an optional Garmin

radar (if applicable), and the unit

ID number. You may need this information to update the system

software or to purchase additional map data information.

Select

Settings > System > System Information.

Viewing the Event Log

The event log shows a list of system events.

Select Settings > System > System Information > Event

Log.

Audio Settings

You can adjust audible alarms, alerts, and warnings that are

sounded over audio output devices connected through HDMI or

analog output using the NMEA

0183 audio cable.

Select

Settings

> System > Sounds and Display > Audio

Setup

Audio Output: Turns on audio for HDMI video and for audio

alerts.

Audio Alerts: Sets which system alarms and alerts are played

over the compatible audio output. The Alarm option indicates

a situation could be hazardous to passengers and requires

immediate action. The Warning option indicates the situation

could be hazardous to equipment on the vessel or the vessel

itself and requires action very soon. All other messages and

information are classified as alerts.

Audio Alert Device: Sets the

FUSION device to control when

alerts are played. You should select the device that is

connected to the chartplotter audio output.

Audio Alert Source: Switches the audio to the selected source

when an alert is played. You should select the device that is

connected to the chartplotter audio output.

Alert Volume: Controls the volume of the alerts.

Preferences Settings

Select

Settings

> Preferences

Units: Sets units of measure.

Language: Sets the on-screen text language.

Navigation: Sets navigation preferences.

42 Device Configuration

Garmin GPSMAP 8600 serie Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8600 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info