Bedienungsanleitung Garmin GPSMAP 8600 serie (Seite 52 von 64) (Englisch)

658282

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

• If the turns in the Auto Guidance line are too wide, select

Settings >

Preferences > Navigation > Auto Guidance

> Shoreline Distance > Nearest

If you selected

Nearest or Farthest in step 8, review the

placement of the Auto Guidance line, and determine

whether the line safely avoids known obstacles and the turns

enable efficient travel.

Auto Guidance maintains a wide clearance from obstacles in

open water, even if you set the Shoreline Distance setting to

Near or

Nearest. As a result, the chartplotter may not

reposition the Auto Guidance line, unless the destination

selected requires navigation through a narrow waterway.

Repeat steps 3 through 9 at least once more, using a

different destination each time, until you are familiar with the

functionality of the Shoreline Distance setting.

Communications Settings

NMEA

0183 Settings

Select

Settings

> Communications > NMEA 0183 Setup

Port Types: See Setting the Communication Format for Each

NMEA

0183 Port, page

44.

Output Sentences: See Configuring NMEA 0183 Output

Sentences

, page

44.

Position Precision: Adjusts the number of digits to the right of

the decimal point for transmission of NMEA

output.

XTE Precision: Adjusts the number of digits to the right of the

decimal point for

NMEA crosstalk error output.

Waypoint IDs: Sets the device to transmit waypoint names or

numbers via

NMEA 0183 while navigating. Using numbers

may resolve compatibility issues with older NMEA 0183

autopilots.

Defaults: Restores the NMEA

0183 settings to the original

factory defaults.

Diagnostics: Displays NMEA

0183 diagnostic information.

Configuring NMEA 0183 Output Sentences

You can enable and disable NMEA 0183 output sentences.

Select Settings > Communications >

NMEA 0183 Setup >

Output Sentences

Select an option.

Select one or more

NMEA 0183 output sentences, and select

Back.

Repeat steps 2 and 3 to enable or disable additional output

sentences.

Setting the Communication Format for Each NMEA 0183

Port

You can configure the communication format for each internal

NMEA

0183 port when connecting your chartplotter to external

NMEA 0183 devices, a computer, or other Garmin devices.

Select Settings >

Communications > NMEA 0183 Setup >

Port Types

Select an input or output port.

Select a format:

• To support the input or output of standard NMEA 0183

data, DSC, and sonar NMEA

input support for the DPT,

MTW, and VHW sentences, select NMEA Std..

• To support the input or output of standard NMEA 0183

data for most AIS receivers, select NMEA High Speed

• To support the input or output of Garmin

proprietary data

for interfacing with Garmin software, select Garmin.

Repeat steps 2–3 to configure additional input or output

ports.

NMEA 2000 Settings

Select Settings

> Communications > NMEA 2000 Setup

Device List: Displays the devices connected to the network.

Label Devices: Changes the labels for available connected

devices.

Naming Devices and Sensors on the Network

You can name devices and sensors connected to the Garmin

Marine Network and the NMEA 2000

network.

Select Settings > Communications.

Select

Marine Network or

NMEA 2000 Setup > Device List.

Select a device from the list on the left.

Select

Change Name.

Enter the name, and select

Done.

Marine Network

The Marine Network allows you to share data from Garmin

peripheral devices with the chartplotters quickly and easily. You

can connect a chartplotter to the Marine Network to receive data

from and share data with other devices and chartplotters that

are compatible with the Marine Network.

Select Settings

> Communications > Marine Network

Setting Alarms

Navigation Alarms

Select Settings

> Alarms > Navigation

Arrival: Sets an alarm to sound when you are within a specified

distance or time from a turn or a destination.

Anchor Drag: Sets an alarm to sound when you exceed a

specified drift distance while anchored.

Off Course: Sets an alarm to sound when you are off course by

a specified distance.

Setting the Anchor Drag Alarm

You can set an alarm to sound if you have moved more than an

allowable distance. This is very useful when anchoring

overnight.

Select Settings > Alarms > Navigation > Anchor Drag.

Select Alarm to turn on the alarm.

Select

Set Radius, and select a distance on the chart.

Select Back

System Alarms

Alarm Clock: Sets an alarm clock.

Unit Voltage: Sets an alarm to sound when the battery reaches

a specified low voltage.

GPS Accuracy: Sets an alarm to sound when the GPS location

accuracy falls outside the user-defined value.

Sonar Alarm Settings

NOTE: Some settings require external accessories.

Select Settings

> Alarms > Sonar

Shallow Water: Sets an alarm to sound when the depth is less

than the specified value.

Deep Water: Sets an alarm to sound when the depth is greater

than the specified value.

Water Temp.: Sets an alarm to sound when the transducer

reports a temperature that is 2°F (1.1°C) above or below the

specified temperature.

Contour: Sets an alarm to sound when the transducer detects a

suspended target within the specified depth from the surface

of the water and from the bottom.

Fish: Sets an alarm to sound when the device detects a

suspended target.

44 Device Configuration

Garmin GPSMAP 8600 serie Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP 8600 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info