Bedienungsanleitung Garmin GPSMAP64S (Seite 12 von 18) (Englisch)

560297

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Location of Destination: The position of your final destination.

You must be navigating for this data to appear.

Odometer: A running tally of distance traveled for all trips. This

total does not clear when resetting the trip data.

Off Course: The distance to the left or right by which you have

strayed from the original path of travel. You must be

navigating for this data to appear.

Pointer: An arrow points in the direction of the next waypoint or

turn. You must be navigating for this data to appear.

Speed: The current rate of travel.

Speed Limit: The reported speed limit for the road. Not

available in all maps and in all areas. Always rely on posted

road signs for actual speed limits.

Speed - Maximum: The highest speed reached since the last

reset.

Speed - Moving Avg.: The average speed while moving since

the last reset.

Speed - Overall Avg.: The average speed while moving and

stopped since the last reset.

Stopwatch Timer: The stopwatch time for the current activity.

Sunrise: The time of sunrise based on your GPS position.

Sunset: The time of sunset based on your GPS position.

Temperature: The temperature of the air. Your body

temperature affects the temperature sensor. Your device

must be connected to a wireless temperature sensor for this

data to appear.

Temperature - Water: The temperature of the water. Your

device must be connected to a NMEA 0183 device capable

of acquiring the water temperature.

Time of Day: The current time of day based on your current

location and time settings (format, time zone, daylight saving

time).

Time To Destination: The estimated time remaining before you

reach the destination. You must be navigating for this data to

appear.

Time To Next: The estimated time remaining before you reach

the next waypoint in the route. You must be navigating for

this data to appear.

To Course: The direction in which you must move to get back

on the route. You must be navigating for this data to appear.

Total Lap: The stopwatch time for all the completed laps.

Track Distance: The distance traveled for the current track.

Trip Odometer: A running tally of the distance traveled since

the last reset.

Trip Time: A running tally of the total time spent moving and not

moving since the last reset.

Trip Time - Moving: A running tally of the time spent moving

since the last reset.

Trip Time - Stopped: A running tally of the time spent not

moving since the last reset.

Turn: The angle of difference (in degrees) between the bearing

to your destination and your current course. L means turn

left. R means turn right. You must be navigating for this data

to appear.

Velocity Made Good: The speed at which you are closing on a

destination along a route. You must be navigating for this

data to appear.

Vertical Dist to Dest: The elevation distance between your

current position and the final destination. You must be

navigating for this data to appear.

Vertical Speed: The rate of ascent or descent over time.

Vertical Speed To Dest: The rate of ascent or descent to a

predetermined altitude. You must be navigating for this data

to appear.

Waypoint At Dest: The last point on the route to the

destination. You must be navigating for this data to appear.

Waypoint At Next: The next point on the route. You must be

navigating for this data to appear.

System Settings

Select Setup > System.

Satellite System: Sets the satellite system to GPS, GPS +

GLONASS , or Demo Mode (GPS off).

WAAS/EGNOS: Enables the system to use Wide Area

Augmentation System/European Geostationary Navigation

Overlay Service (WAAS/EGNOS) data. For more information

about WAAS, go to www.garmin.com/aboutGPS/waas.html.

Language: Sets the text language on the device.

NOTE: Changing the text language does not change the

language of user-entered data or map data, such as street

names.

Interface: Sets the format of the serial interface (Serial Interface

Settings).

AA Battery Type: Allows you to change they type of AA battery

you are using.

NOTE: This setting is disabled when the NiMH battery pack

is installed.

Serial Interface Settings

Select Setup > System > Interface.

Garmin Spanner: Allows you to use the device USB port with

most NMEA 0183-compliant mapping programs by creating a

virtual serial port.

Garmin Serial: Sets the device to use a Garmin proprietary

format to exchange waypoint, route, and track data with a

computer.

NMEA In/Out: Sets the device to use standard NMEA 0183

output and input.

Text Out: Provides simple ASCII text output of location and

velocity information.

RTCM: Allows the device to accept Differential Global

Positioning System (DGPS) information from a device

supplying Radio Technical Commission for Maritime

Services (RTCM) data in an SC-104 format.

Display Settings

Select Setup > Display.

Backlight Timeout: Adjusts the length of time before the

backlight turns off.

Battery Save: Saves the battery power and prolongs the

battery life by turning off the screen when the backlight times

out.

Colors: Changes the appearance of the display background

and selection highlight.

Main, Setup, Find Style: Changes the style of the menu

system.

Screen Capture: Allows you to save the image on the device

screen.

Setting the Device Tones

You can customize tones for messages, keys, turn warnings,

and alarms.

Select Setup > Tones.

Select a tone for each audible type.

8 Customizing Your Device

Garmin GPSMAP64S Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP64S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info