Bedienungsanleitung Garmin GPSMAP64S (Seite 13 von 18) (Englisch)

560297

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Marine Settings

Select Setup > Marine.

Marine Chart Mode: Sets the type of chart the device uses

when displaying marine data. Nautical displays various map

features in different colors so the marine POIs are more

readable and so the map reflects the drawing scheme of

paper charts. Fishing (requires marine maps) displays a

detailed view of bottom contours and depth soundings and

simplifies map presentation for optimal use while fishing.

Appearance: Sets the appearance of marine navigation aids on

the map.

Marine Alarm Setup: Sets alarms for when you exceed a

specified drift distance while anchored, when you are off

course by a specified distance, and when you enter water of

a specific depth.

Setting Up Marine Alarms

Select Setup > Marine > Marine Alarm Setup.

Select an alarm type.

Select On.

Enter a distance, and select Go.

Resetting Data

You can reset trip data, delete all waypoints, clear the current

track, or restore default values.

Select Setup > Reset.

Select an item to reset.

Changing the Page Sequence

From the main menu, select Setup > Page Sequence.

Select a page.

Select Move.

Move the page up or down in the list.

Select ENTER.

TIP: You can select PAGE to view the page sequence.

Adding a Page

From the main menu, select Setup > Page Sequence.

Select Add Page.

Select a page to add.

Removing a Page

From the main menu, select Setup > Page Sequence.

Select a page.

Select Remove.

Select ENTER.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, depth, temperature, pressure, and vertical speed.

Select Setup > Units.

Select a measurement type.

Select a unit of measure.

Time Settings

Select Setup > Time Settings.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Time Zone: Sets the time zone for the device. Automatic sets

the time zone automatically based on your GPS position.

Position Format Settings

NOTE: You should not change the position format or the map

datum coordinate system unless you are using a map or chart

that specifies a different position format.

Select Setup > Position Format.

Position Format: Sets the position format in which a location

reading appears.

Map Datum: Sets the coordinate system on which the map is

structured.

Map Spheroid: Shows the coordinate system the device is

using. The default coordinate system is WGS 84.

Altimeter Settings

NOTE: The altimeter is available only with the GPSMAP 64s

and GPSMAP 64st.

Select Setup > Altimeter.

Auto Calibration: Automatically calibrates the altimeter each

time the device is turned on.

Barometer Mode: Variable Elevation allows the barometer to

measure changes in elevation while you are moving. Fixed

Elevation assumes the device is stationary at a fixed

elevation, so the barometric pressure should only change

due to weather.

Pressure Trending: Sets how the device records pressure

data. Save Always records all pressure data, which can be

helpful when you are watching for pressure fronts.

Plot Type: Records elevation changes over a period of time or

distance, records barometric pressure over a period of time,

or records ambient pressure changes over a period of time.

Calibrate Altimeter: Calibrates the altimeter.

Routing Settings

The device calculates routes optimized for the type of activity

you are doing. The available routing settings vary based on the

activity selected.

Select Setup > Routing.

Activity: Sets an activity for routing. The device calculates

routes optimized for the type of activity you are doing.

Route Transitions: Sets how the device routes from one point

on the route to the next. This setting is available only for

some activities. Distance routes you to the next point on the

route when you are within a specified distance of your

current point.

Lock On Road: Locks the blue triangle, which represents your

position on the map, onto the nearest road.

Profiles

Profiles are a collection of settings that optimize your device

based on how you are using it. For example, the settings and

Customizing Your Device 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin GPSMAP64S Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin GPSMAP64S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info