Bedienungsanleitung Garmin Instinct Solar Surf (Seite 18 von 36) (Englisch)

740387

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

allowing you to share and sync data with your compatible

Garmin device. You can use the mobile app to download maps

for offline access, and then navigate anywhere without using

your cellular service.

You can download the Garmin Explore app from the app store

on your smartphone, or you can go to explore.garmin.com.

Heart Rate Features

The Instinct Solar Surf device has a wrist-based heart rate

monitor and is also compatible with chest heart rate monitors

(sold separately). You can view heart rate data on the heart rate

widget. If both wrist-based heart rate and chest heart rate data

are available when you start an activity, your device uses the

chest heart rate data.

Using the Stress Level Widget

The stress level widget displays your current stress level and a

graph of your stress level for the last several hours. It can also

guide you through a breathing activity to help you relax.

While you are sitting or inactive, press UP or DOWN from the

watch face to view the stress level widget.

Wait until the device begins the stress level reading.

TIP: If you are too active for the watch to determine your

stress level, a message appears instead of a stress level

number. You can check your stress level again after several

minutes of inactivity.

Press GPS to view a graph of your stress level for the last 2.5

hours.

To start a breathing activity, press DOWN > GPS, and enter

a duration for the breathing activity in minutes.

Wrist-based Heart Rate

Wearing the Device

• Wear the device above your wrist bone.

NOTE: The device should be snug but comfortable. For more

accurate heart rate readings, the device should not move

while running or exercising. For pulse oximeter readings, you

should remain motionless.

NOTE: The optical sensor is located on the back of the

device.

• See Tips for Erratic Heart Rate Data, page 14 for more

information about wrist-based heart rate.

• See Tips for Erratic Pulse Oximeter Data, page 16 for more

information about the pulse oximeter sensor.

• For more information about accuracy, go to garmin.com

/ataccuracy.

• For more information about device wear and care, go to

www.garmin.com/fitandcare.

Tips for Erratic Heart Rate Data

If the heart rate data is erratic or does not appear, you can try

these tips.

• Clean and dry your arm before putting on the device.

• Avoid wearing sunscreen, lotion, and insect repellent under

the device.

• Avoid scratching the heart rate sensor on the back of the

device.

• Wear the device above your wrist bone. The device should

be snug but comfortable.

• Wait until the icon is solid before starting your activity.

• Warm up for 5 to 10 minutes and get a heart rate reading

before starting your activity.

NOTE: In cold environments, warm up indoors.

• Rinse the device with fresh water after each workout.

Viewing the Heart Rate Widget

The widget displays your current heart rate in beats per minute

(bpm) and a graph of your heart rate for the last 4 hours.

From the watch face, select UP or DOWN to view the heart

rate widget.

NOTE: You may need to add the widget to your widget loop

(Customizing the Widget Loop, page 16).

Select GPS to view your average resting heart rate values for

the last 7 days.

Broadcasting Heart Rate Data to Garmin Devices

You can broadcast your heart rate data from your Instinct Solar

Surf device and view it on paired Garmin devices.

NOTE: Broadcasting heart rate data decreases battery life.

From the heart rate widget, hold MENU.

Select Heart Rate Options > Broadcast Heart Rate.

The Instinct Solar Surf device starts broadcasting your heart

rate data, and appears.

NOTE: You can view only the heart rate widget while

broadcasting heart rate data from the heart rate widget.

Pair your Instinct Solar Surf device with your Garmin ANT+

compatible device.

NOTE: The pairing instructions differ for each Garmin

compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, press any

button, and select Yes.

Broadcasting Heart Rate Data During an Activity

You can set up your Instinct Solar Surf device to broadcast your

heart rate data automatically when you begin an activity. For

example, you can broadcast your heart rate data to an Edge

device while cycling, or to a VIRB

action camera during an

activity.

NOTE: Broadcasting heart rate data decreases battery life.

From the heart rate widget, hold MENU.

Select Heart Rate Options > Broadcast During Activity.

Begin an activity (Starting an Activity, page 2).

14 Heart Rate Features

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Instinct Solar Surf Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Instinct Solar Surf

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info