Bedienungsanleitung Garmin MARQ Athlete (Seite 19 von 56) (Englisch)

692298

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

NOTE: The pairing instructions differ for each Garmin

compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, press any

button, and select Yes.

Broadcasting Heart Rate Data During an Activity

You can set up your MARQ device to broadcast your heart rate

data automatically when you begin an activity. For example, you

can broadcast your heart rate data to an Edge

device while

cycling, or to a VIRB

action camera during an activity.

NOTE: Broadcasting heart rate data decreases battery life.

From the heart rate widget, hold MENU.

Select Options > Broadcast During Activity.

Begin an activity (Starting an Activity, page 2).

The MARQ device starts broadcasting your heart rate data in

the background.

NOTE: There is no indication that the device is broadcasting

your heart rate data during an activity.

If necessary, pair your MARQ device with your Garmin ANT+

compatible device.

NOTE: The pairing instructions differ for each Garmin

compatible device. See your owner's manual.

TIP: To stop broadcasting your heart rate data, stop the

activity (Stopping an Activity, page 2).

Setting an Abnormal Heart Rate Alert

You can set the device to alert you when your heart rate

exceeds a certain number of beats per minute (bpm) after a

period of inactivity.

From the heart rate widget, hold MENU.

Select Options > Abnormal HR Alert > Status > On.

Select Alert Threshold.

Select a heart rate threshold value.

Each time you exceed the threshold value, a message appears

and the device vibrates.

Turning Off the Wrist-based Heart Rate Monitor

The default value for the Wrist Heart Rate setting is Auto. The

device automatically uses the wrist-based heart rate monitor

unless you pair an ANT+ heart rate monitor to the device.

NOTE: Disabling the wrist-based heart rate monitor also

disables the wrist-based pulse oximeter sensor. You can

perform a manual reading from the pulse oximeter widget.

From the heart rate widget, hold MENU.

Select Options > Status > Off.

Running Dynamics

You can use your compatible MARQ device paired with the

HRM-Tri accessory or other running dynamics accessory to

provide real-time feedback about your running form.

The running dynamics accessory has an accelerometer that

measures torso movement in order to calculate six running

metrics.

Cadence: Cadence is the number of steps per minute. It

displays the total steps (right and left combined).

Vertical oscillation: Vertical oscillation is your bounce while

running. It displays the vertical motion of your torso,

measured in centimeters.

Ground contact time: Ground contact time is the amount of

time in each step that you spend on the ground while

running. It is measured in milliseconds.

NOTE: Ground contact time and balance are not available

while walking.

Ground contact time balance: Ground contact time balance

displays the left/right balance of your ground contact time

while running. It displays a percentage. For example, 53.2

with an arrow pointing left or right.

Stride length: Stride length is the length of your stride from one

footfall to the next. It is measured in meters.

Vertical ratio: Vertical ratio is the ratio of vertical oscillation to

stride length. It displays a percentage. A lower number

typically indicates better running form.

Training with Running Dynamics

Before you can view running dynamics, you must put on a

running dynamics accessory, such as the HRM-Tri accessory,

and pair it with your device (Pairing Your Wireless Sensors,

page 37).

Hold MENU.

Select Activities & Apps.

Select an activity.

Select the activity settings.

Select Data Screens > Add New.

Select a running dynamics data screen.

NOTE: The running dynamics screens are not available for

all activities.

Go for a run (Starting an Activity, page 2).

Select UP or DOWN to open a running dynamics screen to

view your metrics.

Color Gauges and Running Dynamics Data

The running dynamics screens display a color gauge for the primary metric. You can display cadence, vertical oscillation, ground

contact time, ground contact time balance, or vertical ratio as the primary metric. The color gauge shows you how your running

dynamics data compare to those of other runners. The color zones are based on percentiles.

Garmin has researched many runners of all different levels. The data values in the red or orange zones are typical for less

experienced or slower runners. The data values in the green, blue, or purple zones are typical for more experienced or faster

runners. More experienced runners tend to exhibit shorter ground contact times, lower vertical oscillation, lower vertical ratio, and

higher cadence than less experienced runners. However, taller runners typically have slightly slower cadences, longer strides, and

slightly higher vertical oscillation. Vertical ratio is your vertical oscillation divided by stride length. It is not correlated with height.

Go to www.garmin.com/runningdynamics for more information on running dynamics. For additional theories and interpretations of

running dynamics data, you can search reputable running publications and websites.

Color Zone Percentile in Zone Cadence Range Ground Contact Time Range

Purple >95 >183 spm <218 ms

Blue 70–95 174–183 spm 218–248 ms

Green 30–69 164–173 spm 249–277 ms

Orange 5–29 153–163 spm 278–308 ms

Red <5 <153 spm >308 ms

Heart Rate Features 13

Garmin MARQ Athlete Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin MARQ Athlete

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info