Bedienungsanleitung Garmin Quatix (Seite 6 von 22) (Englisch)

522252

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Sensors and GPS Data

Viewing the Data Pages

Customizable data pages allow you to quickly access real-time

data for the compass, barometer, and temperature sensors.

When you begin tracking or navigating, additional data pages

appear.

Data pages can also show data streamed from your NMEA

2000 network through a Garmin

GNT™.

From the time of day page, select or to cycle through

the data pages.

NOTE: Sensor data is not recorded to the device.

Data Page Flows

By default, the time, compass, barometer, and temperature

pages appear in all data page flows. The organization and

appearance of other data pages depends on these conditions.

• The active profile.

• Whether you are tracking, navigating, or viewing only sensor

data.

• Whether you are streaming NMEA 2000 data through a

Garmin GNT.

The data fields on each page can be customized. Some data

fields are available only when streaming NMEA 2000 data

(page 14).

Turning On a Sensor Mode

The default sensor mode is on demand mode, which offers you

quick access to compass, altimeter, barometer, or temperature

data. You can also put the device in always on mode to display

continuous sensor data.

Select the blue key.

Select Setup > Sensors > Mode > Always On.

Compass

The device has a 3-axis compass with automatic calibration.

• Compass navigation (page 3)

• Compass settings (page 10)

Calibrating the Compass

NOTICE

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

Select the blue key.

Select Setup > Sensors > Compass > Calibrate > Start.

Follow the on-screen instructions.

Altimeter and Barometer

The device contains an internal altimeter and barometer.

• On Demand sensor data (page 2)

• Always On sensor data (page 2)

• Altimeter settings (page 11)

Changing the Plot Type

You can change the way the device plots barometer and

elevation data.

Select the blue key.

Select Setup > Sensors > Altimeter.

Select Baro. Plot or Elev. Plot.

Select an option.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. You can manually

calibrate the barometric altimeter if you know the correct

elevation or the correct barometric pressure.

Select the blue key.

Select Setup > Sensors > Altimeter > Calibrate.

Follow the on-screen instructions.

Acquiring Satellites

Before you can use the GPS navigation features, such as

recording a track, you must acquire satellite signals.

The device may need a clear view of the sky to acquire satellite

signals. The time and date are set automatically based on the

GPS position. To adjust the time settings, see page 8.

For more information about GPS, go to www.garmin.com

/aboutGPS.

Select the blue key.

Select Start GPS.

Wait while the device locates satellites.

Stopping GPS

Select the blue key.

Select Stop GPS.

Navigation

You can navigate to a route, track, waypoint, geocache, or any

saved location in the device. You can use the map or the

compass to navigate to your destination.

Navigating to a Destination

You can navigate to a destination using the compass or map

(page 5).

Select the blue key.

Select Start GPS.

Wait while the device locates satellites.

Select the blue key.

Select an option:

• Select Waypoints.

• Select Tracks.

• Select Routes.

• Select GPS Tools > Coordinates.

• Select GPS Tools > POIs.

Select a destination.

Select Go.

The device displays time to destination

, distance to

destination

, and estimated time of arrival

Select to view the compass page.

2 Navigation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Quatix Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Quatix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info