Bedienungsanleitung Garmin Quatix (Seite 7 von 22) (Englisch)

522252

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

The two pointer marks

serve as a bearing pointer. The top

blue mark

points in the direction you are facing.

Align the pointer marks with the top blue mark.

Continue to travel in that direction until you reach the

destination.

Stopping Navigation

Select the blue key.

Select Stop Nav..

Waypoints

Waypoints are locations you record and store in the device.

Creating a Waypoint

You can save your current location as a waypoint.

Hold the blue key.

Select an option:

• To save the waypoint without changes, select Save.

• To make changes to the waypoint, select Edit, make

changes to the waypoint, and select Save.

Finding a Waypoint by Name

Select the blue key.

Select Waypoints > Spell Search.

Use the blue key, , and to enter characters.

When finished, select _ > Done.

Navigating to a Waypoint

Select the blue key.

Select Start GPS.

Wait while the device locates satellites.

Select the blue key.

Select Waypoints, and select a waypoint from the list.

Select Go.

The device displays time to destination

, distance to

destination

, and estimated time of arrival

Select to view the compass page.

The two pointer marks

serve as a bearing pointer. The top

blue mark

points in the direction you are facing.

Align the pointer marks with the top blue mark.

Continue to travel in that direction until you reach the

destination.

Editing a Waypoint

Before you can edit a waypoint, you must create a waypoint.

Select the blue key.

Select Waypoints.

Select a waypoint.

Select Edit.

Select an item to edit, such as the name.

Use the blue key, , and to enter characters.

When finished, select _ > Done.

Increasing the Accuracy of a Waypoint Location

You can refine a waypoint location for more accuracy. When

averaging, the device takes several readings at the same

location and uses the average value to provide more accuracy.

Select the blue key.

Select Waypoints.

Select a waypoint.

Select Average.

Move to the waypoint location.

Select Start.

Follow the on-screen instructions.

When the confidence reaches 100%, select Save.

For best results, collect four to eight samples for the waypoint,

waiting at least 90 minutes between samples.

Projecting a Waypoint

You can create a new location by projecting the distance and

bearing from a marked location to a new location.

Select the blue key.

Select Waypoints.

Select a waypoint.

Select Project.

Follow the on-screen instructions.

The projected waypoint is saved with a default name.

Deleting a Waypoint

Select the blue key.

Select Waypoints.

Select a waypoint.

Select Delete > Yes.

Deleting All Waypoints

Select the blue key.

Select Setup > Reset > Waypoints > Yes.

Navigation 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Quatix Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Quatix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info