Bedienungsanleitung Garmin Striker 5 (Seite 12 von 16) (Englisch)

657482

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

number to display water depth. Enter a 0 in this value to

display depth below keel and depth below transducer.

Select Settings > My Vessel > Keel Offset.

Select or based on the location of the transducer.

Enter the distance measured in step 1.

Setting the Water Temperature Offset

You can set the temperature offset to compensate for the

temperature reading from a temperature-capable sensor.

Measure the water temperature using the temperature-

capable transducer that is connected to the device.

Measure the water temperature using a different

thermometer or temperature sensor that is known to be

accurate.

Subtract the water temperature measured in step 1 from the

water temperature measured in step 2.

This is the temperature offset. Enter this value in step 5 as a

positive number if the sensor connected to the device

measures the water temperature as being colder than it

actually is. Enter this value in step 5 as a negative number if

the sensor connected to the device measures the water

temperature as being warmer than it actually is.

Select Settings > My Vessel > Temp. Offset.

Use the arrow keys to enter water temperature offset

measured in step 3.

Alarms Settings

Navigation Alarms

Select Settings > Alarms > Navigation.

Arrival: Sets an alarm to sound when you are within a specified

distance or time from a turn or a destination.

Anchor Drag: Sets an alarm to sound when you exceed a

specified drift distance while anchored.

Off Course: Sets an alarm to sound when you are off course by

a specified distance.

System Alarms

Alarm Clock: Sets an alarm clock.

Device Voltage: Sets an alarm to sound when the battery

reaches a specified low voltage.

GPS Accuracy: Sets an alarm to sound when the GPS location

accuracy falls outside the user-defined value.

Sonar Alarms

Select Settings > Alarms > Sonar.

Shallow Water: Sounds when the water depth is shallower than

the specified depth.

Deep Water: Sounds when the water depth is deeper than the

specified depth.

Water Temp.: Sounds when the water temperature varies more

than ± 2°F (± 1.1°C). Alarm settings are saved when the

device is turned off.

NOTE: You must connect the device to a temperature-

capable transducer to use this alarm.

Fish: Sets an alarm to sound when the device detects a

suspended target.

• sets the alarm to sound when fish of all sizes are

detected.

• sets the alarm to sound only when medium or large

fish are detected.

• sets the alarm to sound only when large fish are

detected.

Unit Settings

Select Settings > Units.

System Units: Sets the unit format for the device.

Variance: Sets the magnetic declination, the angle between

magnetic north and true north, for your present location.

North Reference: Sets the direction references used in

calculating heading information. True sets geographic north

as the north reference. Grid sets grid north as the north

reference (000º). Magnetic sets the magnetic north as the

north reference.

Position Format: Sets the position format in which a given

location reading appears. Do not change this setting unless

you are using a map or chart that specifies a different

position format.

Map Datum: Sets the coordinate system on which the map is

structured. Do not change this setting unless you are using a

map or chart that specifies a different map datum.

Time Format: Sets a 12-hour, 24-hour, or UTC time format.

Time Zone: Sets the time zone.

Daylight Savings Time: Sets daylight savings time to Off or On.

Navigation Settings

NOTE: Some settings and options require additional hardware.

Select Settings > Navigation.

Route Labels: Sets the type of labels shown with route turns on

the map.

Turn Transition Activ.: Sets the turn transition to be calculated

based on time or distance.

Turn Transition Time: Sets how many minutes before the turn

that you transition to it as the next leg, when Time is selected

for the Turn Transition Activ. setting.

Turn Transition Dist.: Sets how far before the turn that you

transition to it as the next leg, when Distance is selected for

the Turn Transition Activ. setting.

Route Start: Selects a starting point for route navigation. You

can select Boat to start navigation from the current vessel

location, or Waypoints to start from the first waypoint on the

route.

Restoring the Factory Default Settings

NOTE: This deletes all settings information you have entered.

Select > System > System Information > Factory

Settings.

Select an option.

8 Device Configuration

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Striker 5 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Striker 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info