Bedienungsanleitung Garmin Striker 5 (Seite 11 von 16) (Englisch)

657482

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Deleting a Saved Route

Select User Data > Routes.

Select a route.

Select Delete.

Deleting All Saved Routes

Select User Data > Manage Data > Clear User Data >

Routes.

Track

A track is a recording of the current path of your boat. You can

show your current track in waypoint map view.

Setting the Color of the Track

Select User Data > Track > Track Options > Track Color.

Select a track color.

Clearing the Track

Select User Data > Track > Clear Track > OK.

Managing the Track Log Memory During

Recording

Select User Data > Track > Track Options.

Select Record Mode.

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap.

Configuring the Recording Interval of the

Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select User Data > Track > Track Options > Record

Intervals > Interval.

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point.

Deleting All Saved Waypoints, Routes, and

Tracks

Select User Data > Manage Data > Clear User Data > All >

OK.

Device Configuration

System Settings

Select Settings > System.

Display: Adjusts the backlight brightness (Adjusting the

Backlight, page 1) and color scheme (Adjusting the Color

Mode, page 1).

GPS: Provides information about the GPS satellite settings and

fix.

Language: Sets the on-screen language.

Simulator: Turns on the simulator and allows you to set the

speed and simulated location.

Beeper: Turns on and off the tone that sounds for alarms and

selections (Setting the Beeper, page 1).

Auto Power: Turns on the device automatically when power is

applied.

System Information: Provides information about the device and

the software version.

System Information

Select Settings > Settings > System Information.

Event Log: Allows you to view a log of system events.

Software Information: Provides information about the device

and the software version.

Garmin Devices: Provides information about connected Garmin

devices.

Factory Settings: Restores the device to factory settings.

NOTE: This deletes any setting information you have

entered.

My Vessel Settings

NOTE: Some settings and options require additional hardware.

Select Settings > My Vessel.

Transducer Type: Displays the type of transducer connected to

the device (Selecting the Transducer Type, page 1).

Keel Offset: Offsets the surface reading for the depth of a keel,

making it possible to measure depth from the bottom of the

keel instead of from the transducer location (Setting the Keel

Offset, page 7).

Temp. Offset: Compensates for the water temperature reading

from a temperature-capable transducer (Setting the Water

Temperature Offset, page 8).

Setting the Keel Offset

You can enter a keel offset to compensate the surface reading

for the depth of a keel, making it possible to measure water

depth or depth below the keel instead of depth below the

transducer. Enter a positive number to offset for a keel. You can

enter a negative number to compensate for a large vessel that

may draw several feet of water.

Complete an action, based on the location of the transducer:

• If the transducer is installed at the water line

, measure

the distance from the transducer location to the keel of the

boat. Enter this value in steps 3 and 4 as a positive

number to display depth below keel.

• If the transducer is installed at the bottom of the keel

measure the distance from the transducer to the water

line. Enter this value in steps 3 and 4 as a negative

Track 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Striker 5 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Striker 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info