Bedienungsanleitung Garmin Striker Vivid (Seite 11 von 20) (Englisch)

740398

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Surface noise is caused by interference between the

transducer and water. You can hide surface noise to help

reduce clutter. Wider beam widths (lower frequencies) can

show more targets, but can generate more surface noise.

TVG: Reduces surface noise.

This control is best used for situations when you want to

control and suppress clutter or noise near the water surface.

It also allows for the display of targets near the surface that

are otherwise hidden or masked by surface noise.

Overlay Number Settings

You can customize the data shown on the sonar screen.

From a sonar screen, select > Overlay Numbers.

Navigation Inset: Shows the navigation inset when the vessel

is navigating to a destination.

Compass Tape: Shows the compass tape data bar.

Device Voltage: Shows the voltage of the device.

Depth: Shows the transducer's current depth.

Speed: Shows the vessel's current speed.

Water Temp.: Shows the current water temperature.

Time of Day: Shows the current time of day.

Garmin Quickdraw Contours Mapping

WARNING

The Garmin Quickdraw Contours mapping feature allows users

to generate maps. Garmin makes no representations about the

accuracy, reliability, completeness or timeliness of the maps

generated by third parties. Any use or reliance on the maps

generated by third parties is at your own risk.

The Garmin Quickdraw Contours mapping feature allows you to

instantly create maps with contours and depth labels for any

body of water.

When Garmin Quickdraw Contours records data, a colored

circle surrounds the vessel icon. This circle represents the

approximate area of the map that is scanned by each pass.

A green circle indicates good depth and GPS position, and a

speed under 16 km/h (10 mph). A yellow circle indicates good

depth and GPS position, and a speed between 16 and 32 km/h

(10 and 20 mph). A red circle indicates poor depth or GPS

position, and a speed above 32 km/h (20 mph).

You can view Garmin Quickdraw Contours in a combination

screen or as a single view on the map.

The amount of saved data depends on the memory available in

the device, your sonar source, and the speed of your boat as

you record data. You can record longer when you use a single-

beam sonar. It is estimated that you might be able to record

about 1,500 hours of data onto the device.

Mapping a Body of Water Using the Garmin

Quickdraw Contours Feature

Before you can use the Garmin Quickdraw Contours feature,

you must have sonar depth and your GPS position.

Select Quickdraw Map > > Quickdraw Contours > Start

Recording.

When recording is complete, select > Quickdraw

Contours > Stop Recording.

Adding a Label to a Garmin Quickdraw

Contours Map

You can add labels to a Garmin Quickdraw Contours map to

mark hazards or points of interest.

From the Quickdraw Map, select a location.

Select Add Quickdraw Label.

Enter text for the label, and select Done.

Deleting Garmin Quickdraw Contours

You can remove your Garmin Quickdraw Contours maps.

Select Quickdraw Map > > Quickdraw Contours >

Delete.

Garmin Quickdraw Community

The Garmin Quickdraw Community is a free, public, online

community that enables you to share your Garmin Quickdraw

Contours maps with others. You can also download maps other

users have created.

If your device has Wi‑Fi technology, you can use the

ActiveCaptain app to access the Garmin Quickdraw Community

(Connecting to the Garmin Quickdraw Community with

ActiveCaptain, page 7).

NOTE: The Garmin device must have a memory card slot or

Wi‑Fi technology to participate in the Garmin Quickdraw

Community.

Connecting to the Garmin Quickdraw Community with

ActiveCaptain

From your mobile device, open the ActiveCaptain app and

connect to the STRIKER Vivid device (Getting Started with

the ActiveCaptain App, page 2).

From the app, select Quickdraw Community.

You can download contours from others in the community

(Downloading Garmin Quickdraw Community Maps Using

ActiveCaptain, page 7) and share the contours you have

created (Sharing Your Garmin Quickdraw Contours Maps with

the Garmin Quickdraw Community Using ActiveCaptain,

page 7).

Downloading Garmin Quickdraw Community Maps Using

ActiveCaptain

You can download Garmin Quickdraw Contours maps that other

users have created and shared with the Garmin Quickdraw

Community.

From the ActiveCaptain app on your mobile device, select

Quickdraw Community > Search for Contours.

Use the map and search features to locate an area to

download.

The red dots represent Garmin Quickdraw Contours maps

that have been shared for that area.

Select Select Download Region.

Drag the box to select the area to download.

Drag the corners to change the download area.

Select Download Area.

The next time you connect the ActiveCaptain app to the

STRIKER Vivid device, the downloaded contours are transferred

to the device automatically.

Sharing Your Garmin Quickdraw Contours Maps with the

Garmin Quickdraw Community Using ActiveCaptain

You can share Garmin Quickdraw Contours maps that you have

created with others in the Garmin Quickdraw Community.

Garmin Quickdraw Contours Mapping 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Striker Vivid Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Striker Vivid

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info