Bedienungsanleitung Garmin Striker Vivid (Seite 12 von 20) (Englisch)

740398

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

When you share a contour map, only the contour map is shared.

Your waypoints are not shared.

When you set up your ActiveCaptain app, you may have

selected to share your contours with the community

automatically. If not, follow these steps to enable sharing.

From the ActiveCaptain app on your mobile device, select

Sync with Plotter > Contribute to Community.

The next time you connect the ActiveCaptain app to the

STRIKER Vivid device, your contour maps are transferred to the

community automatically.

Map Settings

Select Quickdraw Map > .

Waypoints: Shows the list of waypoints.

Waypoint Display: Sets how to display waypoints on the chart.

Quickdraw Contours: Turns on bottom contour drawing, and

allows you to create fishing map labels.

Routes: Shows the list of routes.

Tracks: Shows your travel history on the map.

Search: Allows you to search for saved routes and waypoints.

Map Setup: Sets the perspective of the map and shows the

heading line, which is a line drawn on the map from the bow

of the boat in the direction of travel.

Overlay Numbers: Allows you to customize the data shown on

the map.

Garmin Quickdraw Contours Settings

From a chart, select > Quickdraw Contours > Settings.

Recording Offset: Sets the distance between the sonar depth

and the contour recording depth. If the water level has

changed since your last recording, adjust this setting so the

recording depth is the same for both recordings.

For example, if the last time you recorded had a sonar depth

of 3.1 m (10.5 ft.), and today's sonar depth is 3.6 m (12 ft.),

enter -0.5 m (-1.5 ft.) for the a Recording Offset value.

User Display Offset: Sets differences in contour depths and

depth labels on your own contours maps to compensate for

changes in the water level of a body of water, or for depth

errors in recorded maps.

Comm. Display Offset: Sets differences in contour depths and

depth labels on the community contours maps to compensate

for changes in the water level of a body of water, or for depth

errors in recorded maps.

Survey Coloring: Sets the color of the Garmin Quickdraw

Contours display. When this setting is turned on, the colors

indicate the quality of the recording. When this setting is

turned off, the contour areas use standard map colors.

Green indicates good depth and GPS position, and a speed

under 16 km/h (10 mph). Yellow indicates good depth and

GPS position, and a speed between 16 and 32 km/h (10 and

20 mph). Red indicates poor depth or GPS position, and a

speed above 32 km/h (20 mph).

Depth Range Shading

You can set color ranges on your map to show the water depths

where your target fish are currently biting. You can set deeper

ranges to monitor how quickly the bottom depth changes within

a specific depth range. You can create up to ten depth ranges.

For inland fishing, a maximum of five depth ranges can help

reduce map clutter. The depth ranges apply to all charts and all

bodies of water.

Some Garmin LakeVü

™

and premium supplemental charts have

multiple depth range shading by default.

Red From 0 to 1.5 m (from 0 to 5 ft.)

Orange From 1.5 to 3 m (from 5 to 10 ft.)

Yellow From 3 to 4.5 m (from 10 to 15 ft.)

Green From 4.5 to 7.6 m (from 15 to 25 ft.)

Navigation with the STRIKER Vivid

WARNING

When navigating, the course may pass over land or shallow

water. Use visual sightings, and steer to avoid land, shallow

water, and other dangerous objects.

You can set and follow a course to a destination using one of

two methods: Go To or Route To.

Go To: Takes you directly to the destination. This is the

standard option for navigating to a destination. The device

creates a straight-line course or navigation line to the

destination. The path may run over land and other obstacles.

Route To: Creates a route from your location to a destination,

allowing you to add turns along the way. This option provides

a straight-line course to the destination, but allows you to add

turns into the route to avoid land and other obstacles.

Searching for a Destination by Name

You can search for saved waypoints, saved routes, saved

tracks, and marine services destinations by name.

Enter at least a portion of the name of your destination.

If necessary, select Done.

The 50 nearest destinations that contain your search criteria

appear.

Select the destination.

Creating a Waypoint on the Map

From the Quickdraw Map, select a location.

Select .

A list of options appears along the right side of the chart. The

options vary based on the location or object you selected.

Select Create Waypoint.

Navigating to a Waypoint

From the Quickdraw Map, use the arrow keys to select the

waypoint.

The waypoint name appears on the screen.

Select .

Select Navigate To > Go To.

Creating and Navigating a Route Using the

Map

The starting point can be your present location or another

location on the map.

Select User Data > Routes > New > Route Using Chart.

Pan the map to select the starting location of the route.

Select to add a turn to the route.

Repeat to add all of the turns in the route.

8 Navigation with the STRIKER Vivid

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Striker Vivid Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Striker Vivid

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info