Bedienungsanleitung Garmin Striker Vivid (Seite 17 von 20) (Englisch)

740398

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

User Data Sharing Cable Wiring Diagram

First device

User data cable

Second device

Item Wire Function Wire Color

Data Blue

Data Brown

Ground Black

Data Green

Data White

Clearing Saved Data

You can remove saved user data from the device memory.

Select User Data > Manage Data > Clear User Data.

Select an option.

NOTICE

If you select All, all the data you have saved will be removed,

except Garmin Quickdraw contours data.

If you are connected to another device and User Data

Sharing is enabled, data is removed from all connected

devices.

Appendix

Registering Your Device with the Serial

Number

If your device does not have Wi‑Fi technology, you can register

using the device's serial number. If your device has Wi‑Fi

technology, you should use the ActiveCaptain app to register the

device (Getting Started with the ActiveCaptain App, page 2).

Keep the original sales receipt, or a photocopy, in a safe place.

Locate the serial number on the product box or on the device.

Go to my.garmin.com/registration.

Enter the serial number.

Specifications

Temperature range From -15° to 55°C (from 5° to 131°F)

Water rating IEC 60529 IPX7

Input voltage From 12 to 20 Vdc

Rated current 1.5 A

Fuse 3 A, 250 V fast-acting

Wireless frequency and protocol

Wi‑Fi, 2.4 GHz @ 22 dBm maximum

The device withstands incidental exposure to water of up to 1 m for up to 30 min.

For more information, go to www.garmin.com/waterrating.

Not available on all models.

Troubleshooting

My device will not turn on or keeps turning off

Devices erratically turning off or not turning on could indicate an

issue with the power supplied to the device. Check these items

to attempt to troubleshoot the cause of the power issue.

• Make sure the power source is generating power.

You can check this several ways. For example, you can

check whether other devices powered by the source are

functioning.

• Check the fuse in the power cable.

The fuse should be located in a holder that is part of the red

wire of the power cable. Check that the proper size fuse is

installed. Refer to the label on the cable or the installation

instructions for the exact fuse size needed. Check the fuse to

make sure there is still a connection inside of the fuse. You

can test the fuse using a multimeter. If the fuse is good, the

multimeter reads 0 ohm.

• Check to make sure the device is receiving at least 12 Vdc.

To check the voltage, measure the female power and ground

sockets of the power cable for DC voltage. If the voltage is

less than 12 Vdc, the device will not turn on.

• If the device is receiving enough power but does not turn on,

contact Garmin product support.

Changing the Fuse in the Power Cable

Open the fuse housing .

Twist and pull the fuse to remove it .

Insert a new 3 A fast-blow fuse.

Close the fuse housing.

My device will not acquire GPS signals

If the device is not acquiring satellite signals, there could be a

few causes. If the device has moved a large distance since the

last time it has acquired satellites or has been turned off for

longer than a few weeks or months, the device may not be able

to acquire the satellites correctly.

• Ensure the device is using the latest software. If not, update

the device software (Updating Software with the

ActiveCaptain App, page 3).

My sonar does not work

• Push the transducer cable all the way into the back of the

device.

Even if the cable seems to be connected, you should push

firmly so that it is fully seated.

• Press , and ensure sonar is enabled.

• Select the correct transducer type (Selecting the Transducer

Type, page 4).

My device is not creating waypoints in the correct

location

You can manually enter a waypoint location to transfer and

share data from one device to the next. If you have manually

entered a waypoint using coordinates, and the location of the

point does not appear where the point should be, the map

datum and position format of the device may not match the map

datum and position format originally used to mark the waypoint.

Position format is the way in which the GPS receiver's position

appears on the screen. This is commonly displayed as latitude/

longitude in degrees and minutes, with options for degrees,

minutes and second, degrees only, or one of several grid

formats.

Appendix 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Striker Vivid Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Striker Vivid

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info