Bedienungsanleitung Garmin Vector 2S (Seite 7 von 16) (Englisch)

589622

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Rotate the pedals a few times in order to activate Vector.

From the home screen, select > Sensors > > Sensor

Details > Crank Length.

Enter the crank length, and select .

Setting the Installation Angle

Before you set the installation angles, you must set the Edge

data fields to display power and cadence.

Go for a short ride on a trainer or on the road.

Ride until the cadence is nearly 70 rpm.

Accelerate smoothly to approximately 90 rpm.

When the installation angles are successfully set, a message

appears and data fields display power data on the Edge

device (1000, 810, and 510 only).

Customizing the Data Fields

This procedure contains instructions for the Edge 1000, 810,

800, and 510 devices. If you have another compatible device,

see Other Compatible Devices.

Hold a data field to change it.

Select a category.

Select a data field.

Training

Pedal-Based Power

Vector measures pedal-based power.

Vector measures the force you apply a few hundred times every

second. Vector also measures your cadence or rotational

pedaling speed. By measuring the force, the direction of force,

the rotation of the crank arm, and time, Vector can determine

power (watts). Because Vector independently measures left and

right leg power, it reports your left-right power balance.

NOTE: The Vector S system does not provide left-right power

balance.

Cycling Dynamics

Cycling dynamics metrics measure how you apply power

throughout the pedal stroke, and where you apply power on the

pedal, allowing you to understand your particular way of riding.

Understanding how and where you produce power allows you to

train more efficiently and evaluate your bike fit.

Using Cycling Dynamics

Before you can use cycling dynamics, you must pair the Vector

power meter with your device (Paring Vector with Your Edge

1000).

NOTE: Recording cycling dynamics uses additional device

memory.

Go for a ride.

Scroll to the cycling dynamics screen to view your peak

power phase

, total power phase

, and platform center

offset

If necessary, hold a data field

to change it (Customizing

the Data Fields).

NOTE: The two data fields at the bottom of the screen can be

customized.

You can send the ride to your Garmin Connect

™

account to view

additional cycling dynamics data (Sending Your Ride to Garmin

Connect).

Power Phase Data

Power phase is the pedal stroke region (between the start crank

angle and the end crank angle) where you produce positive

power.

Platform Center Offset

Platform center offset is the location on the pedal platform where

you apply force.

Maintenance Tips

NOTICE

Some bike tools may scratch the finish of Vector components.

• Use wax paper or a towel between the tool and the hardware.

• After any bike adjustments, rotate the crank arm to check for

clearance.

• Keep Vector components clean.

• When moving Vector to another bike, clean the threads and

surfaces thoroughly.

• Go to www.garmin.com/vectorowner for the latest updates

and information.

Vector Data

Your ride data or history is recorded to your Edge device or

another compatible Garmin device. This section contains

instructions for the Edge 1000.

NOTE: History is not recorded while the timer is stopped or

paused.

When the device memory is full, a message appears. The

device does not automatically delete or overwrite your history.

You should upload your history to your Garmin Connect account

periodically to keep track of all your ride data.

Sending Your Ride to Garmin Connect

NOTICE

To prevent corrosion, thoroughly dry the USB port, the weather

cap, and the surrounding area before charging or connecting to

a computer.

Pull up the weather cap

from the USB port

Training 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Vector 2S Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info