Bedienungsanleitung Garmin Virb 360 (Seite 15 von 22) (Englisch)

661253

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Saved networks appear at the top of the list, below the Auto-

Connect To heading.

Select Forget next to the network you want to remove from

your camera.

After you forget a network, the camera no longer connects to it

automatically.

Multiple Camera Network

You can create a network of multiple VIRB cameras and control

all the cameras using the Garmin VIRB app. You can switch

between the connected cameras to view the viewfinder and

controls for each camera.

To connect multiple cameras, all the cameras and your mobile

device must be connected to the same wireless access point or

network.

You can set up the network using the access point feature of

one VIRB camera. The app and all your cameras connect to this

access point.

You can also set up a camera network using an existing Wi‑Fi

network. The app and all cameras connect to the Wi‑Fi network.

This option is useful when you want to provide internet access to

your mobile device while controlling your cameras.

Setting Up a Camera Network

You can set up a multiple-camera network using the access

point feature of one VIRB camera. This allows the VIRB app to

control all your cameras through this access point.

The first time you use multiple cameras with the Garmin VIRB

app, you must set up the camera access point and connect

another camera to it.

Turn on the first camera, and turn on the Wi‑Fi radio (Turning

the Wi

‑

Fi Radio On or Off, page 10).

The camera broadcasts a Wi‑Fi access point. You should not

connect this camera to the app yet.

Turn on the second camera, and connect it to the app

(Connecting to the Garmin VIRB App Using Wi

‑

Fi Settings,

page 7).

The camera connects to the app, and the viewfinder appears.

From the Garmin VIRB app viewfinder, select > WiFi

Connections.

A list of nearby Wi‑Fi access points appears.

Select the access point broadcast by the first camera, and

enter the password.

TIP: The access point name and password appear on the

first camera's screen.

The app and the second camera connect to the access point.

The app communicates with both cameras through the

access point. You can select in the viewfinder to switch

between your connected cameras (Switching Cameras,

page 11).

The app and cameras save the Wi‑Fi network information. The

next time you turn on your cameras, you should turn on the

access point camera first, followed by the other cameras. The

cameras connect automatically.

If you have additional VIRB cameras, you can add them to the

camera network (Adding a Camera to the Network, page 11).

Adding a Camera to the Network

Before you can add a camera to a camera network, you must

complete one of these tasks:

• Set up a camera network using a VIRB camera access point

(Setting Up a Camera Network, page 11).

• Connect one or more cameras and the Garmin VIRB app to a

Wi‑Fi network (Connecting to a Wi

‑

Fi Network, page 10).

If the Garmin VIRB app is connected to your cameras using a

network or access point, you can add cameras to the camera

network.

With the camera network turned on, turn on the new camera.

On the new camera, turn on the Wi‑Fi radio (Turning the

‑

Fi Radio On or Off, page 10).

The new camera broadcasts a Wi‑Fi access point.

On your mobile device, go to the Wi‑Fi settings, and connect

to the access point broadcast by the new camera.

TIP: The access point name and password appear on the

new camera's screen.

For more information about connecting your mobile device to

a Wi‑Fi network, see your mobile device owner's manual.

On your mobile device, start the Garmin VIRB app.

The viewfinder for the new camera appears.

Select > WiFi Connections.

A list of nearby Wi‑Fi access points appears.

Select the Wi‑Fi access point or network used by your

existing camera network, and enter the network password.

This could be a VIRB camera access point or a Wi‑Fi

network.

The app and the new camera connect to the network. You

can select in the viewfinder to switch between your

connected cameras, including the new camera (Switching

Cameras, page 11).

Switching Cameras

When multiple cameras are connected to the Garmin VIRB app,

you can switch between the cameras to control each camera.

While a connected camera is active, you can access the

viewfinder, camera controls, and settings for that camera.

From the viewfinder, select .

Select a camera name.

The viewfinder for the selected camera appears.

Remote Control

You can remotely start recording, stop recording, and take

pictures on your VIRB camera using the VIRB Remote

accessory or a compatible Garmin device with the VIRB remote

feature, such as a watch, activity tracker, or navigation device.

You can also use one VIRB camera to control one or more other

VIRB cameras. For more information about VIRB remote

compatibility, see the owner's manual for your Garmin device.

Remote Control 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Virb 360 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Virb 360

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info