Bedienungsanleitung Garmin Virb 360 (Seite 16 von 22) (Englisch)

661253

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

The VIRB Remote accessory is a portable, mountable remote

that can control your VIRB camera using ANT+ wireless

technology. It has tactile buttons that allow you to start

recording, stop recording, or take a photo without looking at the

remote. Go to garmin.com/virb to purchase a VIRB Remote

accessory.

Controlling Your VIRB Camera Remotely

These instructions allow you to enable the remote control

feature for one camera or for your main camera. If you have

multiple cameras, you should follow the instructions for

controlling multiple cameras remotely (Controlling Multiple VIRB

Cameras, page 12).

On your camera, from the main menu, select Wireless >

Remote, and select the toggle switch to turn on the remote

control feature.

The camera searches for a nearby main VIRB camera.

After the search times out, select .

The remote control settings appear, with this camera set as

the main VIRB camera.

Select an option:

• On your compatible Garmin device, launch the VIRB app

or feature. See the owner's manual for the device for more

information.

• On the VIRB remote, follow the pairing instructions in the

accessory manual.

Controlling Multiple VIRB Cameras

You can use one VIRB camera to control one or more other

VIRB cameras. This allows you to perform the same action

using multiple cameras at the same time.

To control multiple cameras, you must choose a main camera.

This camera controls the other cameras, which are called

extended cameras. When you start recording or take a photo on

the main camera, the extended cameras start recording or take

a photo at the same time. When you send a remote command

using a VIRB remote or a compatible Garmin device, the main

camera receives the remote command and sends it to the

extended cameras.

Bring all of your VIRB cameras within 3 m (10 ft.) of each

other.

On your main VIRB camera, from the main menu, select

Wireless > Remote, and select the toggle switch to turn on

the remote control feature.

The camera searches for a nearby main VIRB camera.

After the search times out, select .

The remote control settings appear, with this camera set as

the main VIRB camera.

Exit the menu and return to the home screen.

On your extended VIRB camera, select Wireless > Remote,

and select the toggle switch to turn on the remote control

feature.

The camera searches for your main VIRB camera and

connects to it automatically as an extended camera.

TIP: If your camera is set to the incorrect mode, you can

select VIRB Type to switch between the Main VIRB and

Extended VIRB modes.

Repeat step 5 for each extended camera.

After all of the cameras are connected, select an option:

• To start and stop recording on all of your cameras, use the

recording switch on your main camera.

• To take a photo from all of your cameras, select the photo

key on your main camera.

• To control all of your cameras remotely, pair a VIRB

remote or compatible Garmin device with your main

camera (Controlling Your VIRB Camera Remotely,

page 12).

Enabling the Remote Wake Up Feature

The Wake On feature enables your camera to remain in a low-

power state instead of turning off. This allows your remote

control device to wake the camera to start recording or take a

photo.

NOTE: This feature consumes some battery power when the

camera is off. To avoid draining the battery, you should disable

this feature when you are not using the camera, or when you

store the camera overnight or for a longer time period.

Select Wireless > Remote > Wake On.

When you turn off the camera, it enters remote wake-up

mode.

ANT+ Sensors

Your device can be used with wireless ANT+ sensors. For more

information about compatibility and purchasing optional sensors,

go to http://buy.garmin.com.

Pairing ANT+ Sensors

When you pair a compatible ANT+ sensor with your device, the

sensor data is recorded as G-Metrix data.

Put on the heart rate monitor, and install and activate the

sensor.

Bring the camera within 3 m (10 ft.) of the sensor.

From the main menu, select Wireless > Sensors > Add

New.

The camera detects your sensor, and the sensor name

appears on the screen.

Select the sensor name, and select .

After the sensor is paired with your device, the sensor status

changes to Connected.

After you pair the first time, your camera automatically

recognizes and connects to the ANT+ accessory each time it is

activated and within range.

Removing Paired ANT+ Sensors

From the main menu, select Wireless > Sensors.

Select a sensor.

Select Forget Device > .

Bluetooth Devices

Connecting a Wireless External Microphone

You can connect a Bluetooth hands-free device with your VIRB

camera.

From the main menu, select Wireless > Bluetooth > Status

to turn on Bluetooth wireless technology.

Select Add New.

Select the wireless device to pair.

After the wireless device is paired, the device status changes

to Connected.

Connecting an OBD-II Device

Your VIRB camera can pair with a compatible Bluetooth

ELM327 on-board diagnostics (ODB-II) device to record

automotive data from your OBD-II compliant vehicle.

NOTE: Different vehicles provide different data. Not all vehicles

and OBD-II devices are compatible with the camera.

12 ANT+ Sensors

Garmin Virb 360 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Virb 360

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info