Bedienungsanleitung Garmin Virb 360 (Seite 18 von 22) (Englisch)

661253

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Specifications

Water rating 1 ATM*

Operating temperature range

(external power)**

From -20 to 40° C (from -4 to 104° F)

Operating temperature range

(battery power, cold start)**

From 0 to 40° C (from 32 to 104° F)

Operating temperature range

(battery power, warm start)**

From -20 to 40° C (from -4 to 104° F)

Charging temperature range From 0 to 40° C (from 32 to 104° F)

Input voltage 5 V, 2 A

Wireless frequencies and

protocols

2.4 GHz Wi-Fi

2.4 GHz ANT+

2.4 GHz Bluetooth

*The device withstands pressure equivalent to a depth of 10 m.

For more information, go to www.garmin.com/waterrating.

NOTICE

The device is not water resistant when either the battery door or

side door is open.

**The operating temperature range is based on the default

camera settings. Several factors may impact the operating

temperature range, including the mount configuration, video

settings, and Wi‑Fi settings. Performance in cold environments

is improved by starting the camera operation using a battery that

has been stored at room temperature (Low Temperature

Performance Tips, page 14).

Low Temperature Performance Tips

• The battery life and video recording performance of the

camera are reduced at low temperatures. If the battery

temperature is below 0°C (32°F), the battery may not provide

enough power for the camera to operate or record video, and

the camera may turn off.

• You can improve the camera's battery life and video

recording performance in low temperatures by storing the

camera battery at room temperature until you are ready to

use it. If the battery is at room temperature when you turn on

the camera, heat generated by the camera operation

prevents the battery from becoming too cold, and the camera

operates and records video in temperatures as low as

-20°C (-4° F).

• You can store the battery indoors, in a heated vehicle, or in

an empty, interior clothing pocket to keep it at room

temperature. If the camera turns off due to a cold battery, you

can place the battery in an empty pocket or in a room-

temperature environment to warm it.

WARNING

Do not place the battery in a pocket with other objects,

especially sharp or metal objects. Other objects may damage

the battery and may present a risk of damage to the device,

fire, chemical burn, electrolyte leak, and/or injury.

• If you turn off the camera for a long period of time in a low-

temperature environment, you should remove the battery and

keep it at room temperature until you are ready to use the

camera again.

Viewing Regulatory and Compliance

Information

From the About menu, select > Regulatory Info.

Device Care

NOTICE

Avoid contact with chemical cleaners, solvents, gasoline, oil,

insect repellents, or sunscreen. These chemicals can damage

plastic components and finish.

Thoroughly rinse the device with fresh water as soon as

possible after exposure to chlorine, salt water, sunscreen,

cosmetics, alcohol, or other harsh chemicals. Prolonged

exposure to these substances can damage the plastic

components and finish.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Water Exposure and Rating

When the battery door and side door are closed and latched, the

device has a water rating of 1 ATM.*

When using your device near liquids, you must observe these

considerations and care tips to help preserve the water rating

and avoid damage to the camera.

• The device is not water resistant when either the battery door

or side door is open.

• You should keep the door gaskets and sealing surfaces clean

and free of dust and debris.

• The device is not water resistant if the lens, lens retainer, or

lens gasket are damaged or removed, or if the lens retainer is

not fully tightened.

If you replace the cover lens, you must ensure the lens

gasket and sealing surfaces are undamaged, clean, and free

of dust and debris, and you must verify the lens retainer is

fully tightened (Replacing a Cover Lens, page 14).

• You should thoroughly rinse the device as soon as possible

after exposure to saltwater or chlorinated water.

*The device withstands pressure equivalent to a depth of 10 m.

For more information, go to www.garmin.com/waterrating.

Cleaning the Device

Wipe the outer casing of the device with a soft, non-scratch

cloth dampened with water.

Wipe the device dry.

Replacing a Cover Lens

If either of the cover lenses become scratched or damaged, you

can replace them. The VIRB 360 lens replacement kit includes

two cover lenses, two gaskets, and two lens retainer rings. Go to

garmin.com/virb to purchase a lens replacement kit.

Turn the lens retainer ring counter-clockwise to unlock it.

Remove the lens retainer ring, cover lens

, and gasket

Wipe the gasket groove

with a lint-free cloth.

Verify the new cover lens, new gasket, and the gasket groove

are clean and free of dust or debris.

NOTICE

The camera may not be water resistant if the gasket and

sealing surface are not clean and free of dust or debris. Dust

14 Device Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Virb 360 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Virb 360

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info