Bedienungsanleitung Garmin VIRB ELITE (Seite 11 von 16) (Englisch)

544111

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Dashboards

NOTE: This feature is available for VIRB Elite only.

A dashboard is a grouping of data fields, charts, or graphs of

data from the device sensors and connected ANT+ sensors.

The dashboards provide real-time and historical views of the

sensor data recorded to the track log.

NOTE: All minimum, maximum, and average dashboard data

resets after you turn off the device.

Compass displays the current

heading and partial compass ring.

You must be moving to use the

compass.

Time displays the time since the

device was turned on

, time of

day

, and time of sunset or

sunrise

Distance displays the total

distance

, total descent

, and

total ascent

Speed displays the current speed

, average speed

, and

maximum speed

Elevation displays the current

elevation

, maximum and

minimum elevations

, elevation

graph

, and time scale

G-force displays the current g-

force acceleration

and

maximum g-force acceleration

When connected to a sensor,

heart rate displays the current

heart rate

, maximum and

minimum heart rates

, heart rate

graph

, and time scale

When connected to a sensor,

tempe displays the current

temperature

, maximum and

minimum temperatures

temperature graph

, and time

scale

When connected to a sensor,

cadence displays the current

cadence

, maximum and

minimum cadences

, cadence

graph

, and time scale

Viewing the Dashboards

Select MODE > DASHBOARD.

Select or to scroll through the dashboards.

Pairing Your ANT+ Sensors

When you pair a compatible ANT+ sensor with your device, the

sensor data is included in the track log, and you can view

dashboards for the sensor data.

Turn on the sensor, and bring the device and sensor within

10 ft. (3 m) of each other.

On the device, select MODE > SETUP > SENSORS.

On the device, select the type of sensor to pair.

The icon for the sensor blinks. When the icon turns solid, the

sensor is paired and connected.

Tips for Pairing ANT+ Accessories with Your Garmin

Device

• Verify that the ANT+ accessory is compatible with your

Garmin device.

• Before you pair the ANT+ accessory with your Garmin

device, move 10 m (32.9 ft.) away from other ANT+

accessories.

• Bring the Garmin device within range 3 m (10 ft.) of the

ANT+ accessory.

• After you pair the first time, your Garmin device automatically

recognizes the ANT+ accessory each time it is activated.

This process occurs automatically when you turn on the

Garmin device and only takes a few seconds when the

accessories are activated and functioning correctly.

• When paired, your Garmin device receives data from only

your accessory, and you can go near other accessories.

Forgetting Paired ANT+ Sensors

After you pair an ANT+ sensor, your device will not accept data

from another sensor of the same type. To pair a new sensor of

the same type, you must forget paired sensors.

Select MODE > SETUP > SENSORS > Forget All.

Dashboards 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VIRB ELITE Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VIRB ELITE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info