Bedienungsanleitung Garmin VIRB ELITE (Seite 12 von 16) (Englisch)

544111

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Remote Control

You can start recording, stop recording, and take pictures on

your VIRB device using another compatible Garmin device with

ANT+ wireless technology, such as the VIRB remote control

accessory or the fēnix™ watch. You can also use your VIRB

device to control other VIRB devices.

Controlling the Device Remotely

On your VIRB device, select MODE > SETUP > Remote.

Select VIRB Type > Main VIRB.

Select an option:

• On the remote control device, launch the VIRB app or

feature. See the owner's manual for the device for more

information.

• On the remote control accessory, follow the pairing

instructions in the accessory manual.

Controlling Multiple VIRB Devices Remotely

When controlling multiple VIRB devices, you must choose a

main VIRB device. This device controls all your other VIRB

devices.

If you are using a remote control device with multiple VIRB

devices, the remote control device controls only the main VIRB

device. The main VIRB device passes commands received from

the remote control device to the other VIRB devices.

On all of your VIRB devices, select MODE > SETUP >

Remote.

On your main VIRB device, select VIRB Type > Main VIRB.

On each of your other VIRB devices, select VIRB Type >

Extended VIRB.

REC on your main VIRB device starts and stops recording

video on all your VIRB devices. on your main VIRB device

takes a photo from all your VIRB devices.

If you are using a remote control device, select an option:

• On the remote control device, launch the VIRB app or

feature. See the owner's manual for the device for more

information.

• On the remote control accessory, follow the pairing

instructions in the accessory manual.

Operating the Device Using Your Mobile

Device

NOTE: This feature is available for VIRB Elite only.

You can remotely view and control photo and video recording

using a compatible mobile device running the free Garmin VIRB

app. The app connects using a direct Wi-Fi connection between

your VIRB device and your compatible mobile device. Go to

www.garmin.com/VIRB or the application store for your mobile

device for compatibility information.

If necessary, install the Garmin VIRB app from the

application store on your mobile device.

On your VIRB device, select MODE > SETUP > WIFI > WIFI.

The VIRB device enters wireless host mode, and the

SSID and password appear on the device screen.

On your mobile device, go to the wireless settings and

connect to the wireless network that matches the SSID on

the VIRB device screen.

See the owner's manual for your mobile device for more

information.

On your mobile device, enter the password that appears on

the VIRB device screen.

On your mobile device, start the Garmin VIRB app.

Advanced Wireless Settings

You can change the wireless host settings for your device.

Select MODE > SETUP > WIFI > Advanced.

SSID: Sets the SSID, which identifies your VIRB device on

other devices.

Password: Sets the password used to connect to your VIRB

device.

Troubleshooting

My device does not turn on

• Install a memory card (Installing a Memory Card).

The device does not boot if a memory card is not installed.

• Verify the battery is installed correctly (Installing the Battery

Pack).

• Fully charge the battery (Charging the Lithium-Ion Battery

Pack).

My device display is hard to see

The device has a reflective display that maximizes battery life

and is readable in direct sunlight. The display does not have a

backlight and requires ambient light for visibility. If the display

looks dark or hard to see, you should increase the ambient light

or go to a brighter area.

Some information is missing from the

dashboards

Dashboards are available only for VIRB Elite devices

(Dashboards). Some dashboard information requires you to

enable or pair sensors.

• Enable GPS (System Settings), and go to an area with a

clear view of the sky.

Location, speed, distance, and altitude information requires a

GPS signal.

• Connect additional ANT+ sensors (Pairing Your ANT+

Sensors).

Some dashboards are available only when a compatible

ANT+ sensor is connected.

My video recordings do not look smooth

• If video recordings appear shaky, select MODE > SETUP >

ADVANCED > Stabilize to enable image stabilization.

• If video recordings stutter or skip frames, install a class 10 or

better microSD memory card (Installing a Memory Card).

The device requires a class 10 or better memory card to

record smooth high-definition video.

My device turns off when I stop recording

video

If you turn on the device by sliding REC toward the lens, the

device turns off when you slide REC away from the lens. This

allows you to maximize battery life by turning off the device

when it is not recording.

Device Information

System Settings

Select MODE > SETUP > SYSTEM.

GPS: Enables the device to receive GPS satellite signals.

When Recording enables GPS reception only when the

camera is recording video (VIRB Elite only).

NOTE: GPS must be set to On to enable Auto Record.

8 Remote Control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VIRB ELITE Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VIRB ELITE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info