Bedienungsanleitung Garmin VIRB Ultra 30 Actioncam (Seite 16 von 22) (Englisch)

657479

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

control device to wake the camera to start recording or take a

photo.

NOTE: This feature consumes some battery power when the

camera is off. To avoid draining the battery, you should disable

this feature when you are not using the camera, or when you

store the camera overnight or for a longer time period.

Select Wireless > Remote > Remote Wake Up.

When you turn off the camera, it enters remote wake-up

mode. The status LED flashes blue intermittently while the

camera is in remote wake-up mode.

Controlling Multiple VIRB Cameras Using ANT+

Wireless Technology

You can control multiple VIRB cameras using one main VIRB or

an ANT+ device.

When controlling multiple cameras, you must choose a main

VIRB camera. This camera controls all of your other cameras,

which are called extended VIRB cameras. When you start

recording or take a photo on the main camera, the extended

cameras start recording or take a photo at the same time.

When you use an ANT+ device to control multiple cameras, the

ANT+ device controls only the main camera. The main camera

passes commands received from the ANT+ device to the

extended cameras.

Bring all of your VIRB cameras within 3 m (10 ft.) of each

other.

On your main camera, from the main menu, select Wireless

> Remote > Status to turn on remote operation.

A prompt appears, asking whether you have additional VIRB

cameras.

Select Yes, and wait while until the search screen times out.

After 30 to 60 seconds, the search screen times out and the

remote settings page appears, with the VIRB Type setting set

to Main VIRB.

On each of your other cameras, select Wireless > Remote >

Status > Yes.

Each camera searches and connects to the main camera.

The remote settings page appears, with the VIRB Type

setting set to Extended VIRB.

TIP: If one of your cameras is set to the incorrect VIRB type,

you can select VIRB Type to switch between the Main VIRB

and Extended VIRB options.

After all of the cameras are connected, select an option:

• Use the recording switch on your main camera to start and

stop recording on all of your cameras.

• Select the photo key on your main camera to take a photo

from all of your cameras.

• Use an ANT+ device or VIRB remote control accessory to

control all of your cameras.

ANT+ Sensors

Your device can be used with wireless ANT+ sensors. For more

information about compatibility and purchasing optional sensors,

go to http://buy.garmin.com.

Pairing ANT+ Sensors

When you pair a compatible ANT+ sensor with your device, the

sensor data is recorded as G-Metrix data.

Put on the heart rate monitor or install the sensor.

Bring the device within 3 m (10 ft.) of the sensor.

From the main menu, select Wireless > Sensors > Add

New.

Select an option:

• Select Search All.

• Select your sensor type.

Select the sensor to pair.

After the sensor is paired with your device, the sensor status

changes to Connected.

After you pair the first time, your camera automatically

recognizes and connects to the ANT+ accessory each time it is

activated and within range.

Removing Paired ANT+ Sensors

From the main menu, select Wireless > Sensors.

Select a sensor.

Select Remove > Yes.

Bluetooth Devices

Connecting a Wireless External Microphone

You can connect a Bluetooth hands-free device with your VIRB

camera.

From the main menu, select Wireless > Bluetooth > Status

to turn on Bluetooth wireless technology.

Select Add New.

Select the wireless device to pair.

After the wireless device is paired, the device status changes

to Connected.

Connecting an OBD-II Device

Your VIRB camera can pair with a compatible Bluetooth

ELM327 on-board diagnostics (ODB-II) device to record

automotive data from your OBD-II compliant vehicle.

NOTE: Different vehicles provide different data. Not all vehicles

and OBD-II devices are compatible with the camera.

Install your ELM327 compatible OBD-II device in the OBD-II

port of your vehicle.

TIP: See the owner's manual for your vehicle and your OBD-

II device for information about locating the OBD-II port and

installing the OBD-II device.

If necessary, enable pairing mode on your OBD-II device.

TIP: See the owner's manual for your OBD-II device to

enable pairing mode.

From the VIRB camera main menu, select Wireless >

Bluetooth > Status to turn on Bluetooth wireless technology.

Select Add New.

Select the OBD-II device to pair.

TIP: If your OBD-II device does not appear in the list, confirm

that it is still in pairing mode and search again.

After the OBD-II device is paired, the device status changes

to Connected.

Removing Paired Bluetooth Devices

From the main menu, select Wireless > Bluetooth.

Select a wireless device.

Select Forget > Yes.

VIRB Edit

The VIRB Edit application provides easy access to these tools

and services for your device.

• Review and edit recorded videos

• Add G-Metrix gauges, graphs, and more

• Add titles and transitions

12 ANT+ Sensors

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VIRB Ultra 30 Actioncam Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VIRB Ultra 30 Actioncam

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info