Bedienungsanleitung Garmin VIRB Ultra 30 Actioncam (Seite 17 von 22) (Englisch)

657479

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

• Multi-camera support

• Update software and features

The VIRB Edit application is available for Windows

and Mac

computers. Go to garmin.com/VIRBEdit for more information.

Device Information

Camera Setup

NOTICE

From the main menu, select .

Voice Control: Allows you to use your camera by saying words

and commands (Voice Control, page 4).

Record Light: Turns the recording light on or off.

Tone Volume: Adjusts the volume of camera tones.

Playback Volume: Adjusts the video playback volume.

Orientation: Sets the camera to capture correctly oriented video

and photos with the screen facing up or down (Inverting the

Camera Orientation, page 13).

Microphone: Enables the internal or external microphone.

TIP: If wind noise is an issue when recording video, you can

select Off to record video without audio.

Inverting the Camera Orientation

You can change the camera orientation of your device to easily

access the keys during an activity. Some mounting

configurations require you to change the camera orientation. For

example, if using a chest mount while cycling, you can mount

the camera upside down and tilt it upward to compensate for

forward lean.

From the main menu, select > Orientation.

Select an option:

• To automatically set the camera orientation, select Auto.

NOTE: After recording starts, the camera orientation is set

and cannot be automatically adjusted.

• To manually set the camera orientation, select Right Side

Up or Upside Down.

System Settings

From the main menu, select > System.

Regulatory Info: Displays regulatory and compliance

information.

GPS: Enables the camera to receive GPS satellite signals.

NOTE: Your camera records GPS position data at all times

when GPS is on. This data is not collected by Garmin.

Language and Region: Sets the on-screen text language, units

of measure, and video standard (Setting the Video Format,

page 5).

Date and Time: Sets the time and date formats (Date and Time

Settings, page 13).

Auto Off: Turns off the camera automatically when it has not

been used for five minutes.

External Power: Sets the camera to turn on when connected to

external power, or enter charging mode automatically. In

charging mode, the screen and all other features turn off

(Charging the Battery, page 1).

TIP: You can use this setting to keep the camera turned off

while connected to power, especially when used with Auto

Off enabled.

Reset: Restores the default settings. You can use the Settings

option to clear all user data, or the Factory Reset option to

restore all settings to the factory default values.

Format Card: Erases all data from the installed memory card

(Erasing Your Memory Card, page 13).

About: Displays important software information and your unit ID.

Date and Time Settings

From the main menu, select > System > Date and Time.

Time Format: Sets the device to show time in a 12-hour or a

24-hour format.

Date Format: Sets the device to show dates in a MM/DD/YY or

a DD/MM/YY format.

Time: Sets the time manually or automatically based on your

GPS position.

Time Zone: Sets the time zone for the device. When you set the

time automatically, the time zone is set based on your GPS

position.

Daylight Saving: Indicates whether daylight saving time is

observed in your region. The Automatic option sets daylight

saving automatically based on your GPS position.

Erasing Your Memory Card

NOTICE

Erased data cannot be restored.

You can erase all photos, videos, and other data on the memory

card installed in your device.

From the main menu, select > System > Format Card >

Yes.

Viewing Regulatory and Compliance Information

From the system settings, select Regulatory Info.

Display Settings

From the main menu, select Display.

Viewfinder: Sets the viewfinder mode (Viewfinder Modes,

page 13).

Screen Timeout: Sets the length of time before the screen turns

off and enters standby mode.

Lock Screen: Locks the touchscreen to prevent inadvertent

screen touches.

Brightness: Adjusts the screen brightness.

Viewfinder Modes

You can use the viewfinder to set up shots, view status

information, or view data from the device sensors. Sensor

information appears as a grouping of data fields, charts, or

graphs, and provides real-time and historical views of the sensor

data recorded on the device.

From the main menu, select Display > Viewfinder > Mode.

Preview: Displays the camera viewfinder and provides

additional options.

Grid: Turns on grid lines to frame and balance your shot in

preview mode.

Overexposure: Highlights overexposed areas of the shot in

preview mode.

Speed: Displays the current speed, average speed, and

maximum speed.

NOTE: All minimum, maximum, and average data resets

after you turn off the device.

Distance: Displays the total distance traveled.

Elevation: Displays the current elevation, elevation graph, and

time scale.

Device Care

NOTICE

Avoid chemical cleaners, solvents, and insect repellents that can

damage plastic components and finishes.

Device Information 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VIRB Ultra 30 Actioncam Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VIRB Ultra 30 Actioncam

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info