Bedienungsanleitung Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 (Seite 45 von 74) (Englisch)

691428

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

NOTE: These settings do not apply to the radar overlay.

Bkgd. Color: Sets the color for the background.

Frgd. Color: Sets the color scheme for the radar returns.

Look-Ahead Speed: Shifts your present location toward the

bottom of the screen automatically as your speed increases.

Enter your top speed for the best results.

Heading Line: Shows an extension from the bow of the boat in

the direction of travel on the radar screen.

Range Rings: Shows the range rings that help you to visualize

distances on the radar screen.

Bearing Ring: Shows a bearing relative to your heading or

based on a north reference, to help you determine the

bearing to an object shown on the radar screen.

Nav Lines: Shows the navigation lines that indicate the course

you have set using Route To, Auto Guidance, or Go To.

Waypoints: Shows waypoints on the radar screen.

Radar Installation Settings

Front of Boat: Compensates for the physical location of the

radar when it is not on the boat axis (Front-of-Boat Offset,

page 37).

Antenna Configuration: Sets the radar antenna size and sets

the position in which the radar stops (Setting a Custom Park

Position, page 37).

No Transmit Zone: Sets the area in which the radar does not

transmit signals (Enabling and Adjusting a Radar No

Transmit Zone, page 33).

Front-of-Boat Offset

The front-of-boat offset compensates for the physical location of

the radar scanner on a boat, if the radar scanner does not align

with the bow-stern axis.

Measuring the Potential Front-of-Boat Offset

The front-of-boat offset compensates for the physical location of

the radar scanner on a boat, if the radar scanner does not align

with the bow-stern axis.

Using a magnetic compass, take an optical bearing of a

stationary target located within viewable range.

Measure the target bearing on the radar.

If the bearing deviation is more than +/- 1°, set the front-of-

boat offset.

Setting the Front-of-Boat Offset

Before you can set the front-of-boat offset, you must measure

the potential front-of-boat offset.

The front-of-boat offset setting configured for use in one radar

mode is applied to every other radar mode and to the Radar

overlay.

From a Radar screen or the Radar overlay, select Menu >

Radar Setup > Installation > Front of Boat.

Select Up or Down to adjust the offset.

Setting a Custom Park Position

By default, the antenna is stopped perpendicular to the pedestal

when it is not spinning. You can adjust this position.

From the radar screen, select Menu > Radar Setup >

Installation > Antenna Configuration > Park Position.

Use the slider bar to adjust the position of the antenna when

stopped, and select Back.

Selecting a Different Radar Source

Select an option:

• From a radar screen or the radar overlay, select Menu >

Radar Setup > Source.

• Select Settings > Communications > Preferred

Sources > Radar.

Select the radar source.

Changing the Radar Mode

From a combination screen or SmartMode layout with radar,

select Menu > Change Radar.

Select a radar mode.

Autopilot

WARNING

You are responsible for the safe and prudent operation of your

vessel. The autopilot is a tool that enhances your capability to

operate your boat. It does not relieve you of the responsibility of

safely operating your boat. Avoid navigational hazards and

never leave the helm unattended.

Always be prepared to promptly regain manual control of your

boat.

Learn to operate the autopilot on calm and hazard-free open

water.

Use caution when operating the autopilot near hazards in the

water, such as docks, pilings, and other boats.

The autopilot system continuously adjusts the steering of your

boat to maintain a constant heading (heading hold). The system

also allows manual steering and several modes of automatic-

steering functions and patterns.

When the chartplotter is connected to a compatible Garmin

autopilot system, you can engage and control the autopilot from

the chartplotter.

For information about compatible Garmin autopilot systems, go

to garmin.com.

Autopilot Configuration and Commissioning

NOTICE

You can use the autopilot feature only at a station installed next

to a helm and throttle.

Your autopilot and chartplotter must be installed and configured

by a Volvo Penta dealer.

Opening the Autopilot Screen

Before you can open the autopilot screen, you must have a

compatible Garmin autopilot installed and configured.

Select OneHelm™, A/V, Gauges > Autopilot.

Autopilot Screen

Actual heading

Intended heading (heading the autopilot is steering toward)

Actual heading (when in standby mode)

Intended heading (when engaged)

Rudder position indicator (This functionality is available only when a

rudder sensor is connected.)

Adjusting the Step Steering Increment

From the Autopilot screen, select Menu > Autopilot Setup >

Step Turn Size.

Autopilot 37

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin VOLVO PENTA GLASS COCKPIT Gpsmap 722

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info